Flow patterns and wall shear stress distribution in human internal carotid arteries: the geometric effect on the risk for stenoses.
نویسندگان
چکیده
It has been widely observed that atherosclerotic stenosis occurs at sites with complex hemodynamics, such as arteries with high curvature or bifurcations. These regions usually have very low or highly oscillatory wall shear stress (WSS). In the present study, 3D sinusoidally pulsatile blood flow through the models of internal carotid artery (ICA) with different geometries was investigated with computational simulation. Three preferred sites of stenoses were found along the carotid siphon with low and highly oscillatory WSS. The risk for stenoses at these sites was scaled with the values of time-averaged WSS and oscillating shear index (OSI). The local risk for stenoses at every preferred site of stenoses was found different between 3 types of ICA, indicating that the geometry of the blood vessel plays significant roles in the atherogenesis. Specifically, the large curvature and planarity of the vessel were found to increase the risk for stenoses, because they tend to lower WSS and elevate OSI. Therefore, the geometric study makes it possible to estimate the stenosis location in the ICA siphon as long as the shape of ICA was measured.
منابع مشابه
Simulating blood flow and oxygen transport in stenosed large arteries
Altered flow and mass transfer patterns are thought to play an important role in the early onset of atherosclerosis. A disturbed wall shear distribution and the prevalence of hypoxic (low oxygen tension) are specifically believed to be atherogenic factors, which can function as a positive feedback on the development of atherosclerosis. In this work, blood flow and oxygen mass transport have bee...
متن کاملThe effect of turbulence model on predicting the development and progression of coronary artery atherosclerosis
A severe case of stenosis in coronary arteries results in turbulence in the blood flow which may lead to the formation or progression of atherosclerosis. This study investigated the turbulent blood flow in a coronary artery with rigid walls, as well as 80% single and double stenoses on blood flow. A finite element-based software package, ADINA 8.8, was employed to model the blood flow. The hemo...
متن کاملStudy of Pulsatile Non-Newtonian Blood Flow Through Abdominal Aorta and Renal Arteries Incorporating Fluid- Structure Interaction
Background: The interaction between the blood and the vessel wall is of great clinical interest in studying cardiovascular diseases, the major causes of death in developed countries.Objective: To understand the effects of incorporating fluid-structure interaction into the simulation of blood flow through an anatomically realistic model of abdominal aorta and renal arteries reconstructed from CT...
متن کاملNumerical analysis of 3D blood flow and common carotid artery hemodynamics in the carotid artery bifurcation with stenosis.
The results for blood flow in the carotid artery bifurcation on the basis of numerical simulation of Navier-Stokes equations are presented in this study. Four cases of carotid bifurcation are considered: common carotid artery (CCA) bifurcation without stenoses and cases with one, two and three stenoses are also presented. The results are obtained by performing numerical simulations considering ...
متن کاملMaximal wall shear stress in arterial stenoses: application to the internal carotid arteries.
Maximal wall shear stress (MWSS) in the convergent part of a stenosis is calculated by the interactive boundary-layer theory. A dimensional analysis of the problem shows that MWSS depends only on a few measurable parameters. A simple relationship between MWSS and these parameters is obtained, validated, and used to calculate the magnitude of MWSS in a carotid stenosis, as a function of the pate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of biomechanics
دوره 45 1 شماره
صفحات -
تاریخ انتشار 2012