Facile synthesis of concentrated gold nanoparticles with low size-distribution in water: temperature and pH controls
نویسندگان
چکیده
The citrate reduction method for the synthesis of gold nanoparticles (GNPs) has known advantages but usually provides the products with low nanoparticle concentration and limits its application. Herein, we report a facile method to synthesize GNPs from concentrated chloroauric acid (2.5 mM) via adding sodium hydroxide and controlling the temperature. It was found that adding a proper amount of sodium hydroxide can produce uniform concentrated GNPs with low size distribution; otherwise, the largely distributed nanoparticles or instable colloids were obtained. The low reaction temperature is helpful to control the nanoparticle formation rate, and uniform GNPs can be obtained in presence of optimized NaOH concentrations. The pH values of the obtained uniform GNPs were found to be very near to neutral, and the pH influence on the particle size distribution may reveal the different formation mechanism of GNPs at high or low pH condition. Moreover, this modified synthesis method can save more than 90% energy in the heating step. Such environmental-friendly synthesis method for gold nanoparticles may have a great potential in large-scale manufacturing for commercial and industrial demand.
منابع مشابه
A Facile pH Controlled Citrate-Based Reduction Method for Gold Nanoparticle Synthesis at Room Temperature
The synthesis of gold nanoparticles using citrate reduction process has been revisited. A simplified room temperature approach to standard Turkevich synthesis is employed to obtain fairly monodisperse gold nanoparticles. The role of initial pH alongside the concentration ratio of reactants is explored for the size control of Au nanoparticles. The particle size distribution has been investigated...
متن کاملA green approach to the facile synthesis of colloidal platinum nanoparticles by Preyssler polyoxometalate
In the present study, platinum nanoparticles were synthesized through an effective, facile and green method using H14[NaP5W30O110], a Preyssler-structured polyoxometalate, under UV light irradiation. Preyssler plays the roles of photocatalyst, reducing agent and stabilizer in the synthesis of Pt nanoparticles. The effect of different parameters, i.e. time, propan-2-ol volume, pH, molar ratio of...
متن کاملSynthesis of CuFeS2 Nanoparticles by One-pot Facile Method
Monodisperse copper-iron-sulfide (CuFeS2) nanoparticles as the infrared light absorbing material (chalcopyrite, 0.65 eV), were synthesized based on facile, one step heating up method, by dissolving of CuCl, FeCl3 and SC(NH2)2 as precursors in oleylamine (OLA) alone or in combination with oleic acid (OA) and 1-octadecene (ODE) as solvent. The phase, size, morphology, and size distribution were c...
متن کاملFacile Fabrication of Boron-Doped Titania Nanopowders by Atmospheric Pressure Chemical Vapor Synthesis Route and its Photocatalytic Activity
The Atmospheric Pressure Chemical Vapor Synthesis (APCVS) route is a process that can be used for the synthesis of doped-nanocrystalline powders with very small crystallite sizes having a narrow particle size distribution and high purity. In this study, APCVS technique was used to prepare boron-doped titania nanopowders. The effects of temperature, borate flow rate and water flow rate on the am...
متن کاملSynthesis of gold nanoparticles: a new approach in using a nanoporous membrane in conjunction with ultrasonication
Gold nanoparticles were synthesized by chemical reduction of HAuCl4 inside the pores of a polycarbonate-based membrane followed by dissolving the membrane in dichloromethane and further sonication. Sonication time as the main affecting factor on the nanoparticle size was investigated. The characterization by transmission electron microscopy showed the formation of gold nanoparticles with diamet...
متن کامل