Stator Core with Slits in Transverse Flux Rotary Machine to Reduce Eddy Current Loss
نویسندگان
چکیده
This paper presents an eddy current loss analysis for a transverse flux rotary machine (TFRM) with laminated stator cores, which consist of inner and outer cores whose laminated directions are perpendicular to each other. Although the TFRM is laminated to reduce eddy current losses, it still exhibits rapidly increasing core losses as the frequency increases. To solve this problem, slits are introduced to the stator outer core. 3-dimensional finite element analysis (3D FEA) based on the T-Ω formulation is used to solve the eddy-current problem for a various numbers of slits in the nonlinear lamination core. The effects of the slits are confirmed using experiment data and 3D FEA results.
منابع مشابه
Smart Starting of Induction Motor by Changing Core Magnetic Flux Value
Single-phase squirrel cage and three-phase induction electromotors are the most popular electromotors used in industry from long ago. When an induction motor starts with direct connection method, it takes a lot of current from the power supply (several times the nominal current); so, several methods have been devised to start such electromotors. These methods either reduce the voltage of the st...
متن کاملInfluencies of the Slits on Magnetic Flux Density for Induction Motors Having Different Rotor Slot Geometries
There are many methods in literature for canalizing of circulating useful flux from stator core to rotor core without radial movements in induction machines. It is obvious to healing of useful flux with decreasing radial moved zig-zag flux and it increases the motor performance. Magnetic barrier, cutout and using of slits are the most used methods for improve the circulating useful flux in the ...
متن کاملCogging Torque Reduction of Sandwiched Stator Axial Flux Permanent Magnet Brushless DC Motor using Magnet Notching Technique
Cogging torque reduction of axial flux permanent magnet brushless dc (PMBLDC) motor is an important issue which demands attention of machine designers during design process. This paper presents magnet notching technique to reduce cogging torque of axial flux PMBLDC motor designed for electric vehicle application. Reference axial flux PMBLDC motor of 250 W, 150 rpm is designed with 48 stator slo...
متن کاملDiscrete Time Control Method for SVM Direct Active Power and Stator Flux Control of PMSG-Based Wind Turbine
This paper proposes a new method for direct control of active power and stator flux of permanent magnet synchronous generator (PMSG) used in the wind power generation system. Active power and stator flux are controlled by the proposed discrete time algorithm. Despite the commonly used vector control methods, there is no need for inner current control loops. To decrease the errors between refere...
متن کاملCurrent Limitation and Speed Drop Minimization in Optimal-Efficiency of Induction Motors
In conventional direct torque control (DTC), the stator flux is usually kept constant by controlling the x-axis component of the stator voltage in the stator flux reference frame. The torque is then controlled by the y-axis component of stator voltage. In this scenario, the stator current does not exceed its permissible value. However, in the so-called optimal efficiency mode, the induction mot...
متن کامل