DESIGN AND ANALYSIS OF TAPERED SLOT AN- TENNA WITH 3.5/5.5 GHz BAND-NOTCHED CHARAC- TERISTICS
نویسندگان
چکیده
A novel tapered slot antenna (TSA) with 3.5/5.5 GHz dual band-notched characteristics for ultra-wideband (UWB) radios is proposed in this paper. To realize dual band-notched characteristics at the TSA, we employ (a) a pair of nested C-shaped stubs beside the feed line and (b) a broadband microstrip-to-slot-line transition with an Archimedean spiral-shaped slot. The proposed antenna has been successfully simulated, implemented, and measured. An equivalent circuit model of the proposed antenna is also presented to discuss the mechanism of the dual band-notched TSA. The measured data for the optimized case show the bandwidth for the VSWR < 2 to be 9.2GHz (from 2.4 to 11.6 GHz) with two notched bands of 3.1– 4.0GHz (WiMAX band) and 5.1–6.2GHz (WLAN band), respectively. The measured electrical parameters of the proposed antenna and its radiation patterns show excellent performance with good pulse handling capabilities. Also, the 3.5/5.5 GHz dual band-notched characteristics are achieved without increasing the size of the single band-notched TSA reported previously.
منابع مشابه
A DESIGN OF MINIATURIZED ULTRA-WIDEBAND PRINTED SLOT ANTENNA WITH 3.5/5.5 GHz DUAL BAND-NOTCHED CHARACTERISTICS: ANALYSIS AND IMPLEMENTATION
A design and analysis of a novel proximity-fed printed slot antenna with 3.5/5.5 GHz dual band-notched characteristics are presented. To obtain an ultra-wideband (UWB) response, a circular patch with a rectangular conjunction arm is etched concentrically inside a ground plane aperture. The antenna is proximity-fed by a microstrip line with an open shunt stub on the other side of the substrate. ...
متن کاملImplementation and investigation of circular slot UWB antenna with dual-band-notched characteristics
The design and analysis of an ultra wideband aperture antenna with dual-band-notched characteristics are presented. The proposed antenna consists of a circular ring exciting stub on the front side and a circular slot on the back ground plane. By utilizing a parasitic strip and a T-shaped stub on the antenna structure, two notched bands of 850 MHz (3.5-4.35 GHz) and 900 MHz (5.05-5.95 GHz) are a...
متن کاملDesign and Analysis of Ultra-wide Band Bandpass Filter Using Spiral Stub-Loaded Triple-Mode Resonator with a Notched Band
An ultra-wide band band-pass filter using novel spiral stub-loaded triple-mode resonator (SSLTMR) is presented. New spiral stub loaded resonator is analyzed with odd and even modes analysis for this class of BPF, achieving higher band wide and size reduction. In order to have a good response characterized, two (SSL-TMRs) and two quarter wavelength digital coupled lines are used. This new design...
متن کاملA Miniaturized Ultra Wideband Slot Antenna with Band Notched Characteristic
A Compact planar slot antenna is proposed and developed for Ultra Wideband Applications. The antenna has compact size of 28 x 31 x 0.8 mm 3 . The antenna is fabricated with FR4 substrate and it is fed by Coplanar Wave Guide. The antenna is investigated experimentally to obtain required return loss, gain and radiation pattern characteristics. The antenna operates over a band between 3.1 GHz and ...
متن کاملDesign and Analysis of Triple Notched Band Uwb Band Pass Filter Using Defected Microstrip Structure (Dms)
This paper presents design, simulation, fabrication and electrical analysis of a triple notched band UWB band pass filter. Short circuit stubs and microstrip line defected structures are used to design a triple notched band UWB filter. The proposed UWB BPF consists of five short circuited stubs of quarter wavelength attached to the feed line. The notched bands are created by introducing three U...
متن کامل