The next Linear Collider Extraction Line Design
نویسندگان
چکیده
The two main functions of the NLC extraction line include: 1) transmission of the outgoing disrupted beam and secondary particles to the dump with minimal losses; and 2) beam diagnostics and control. In this report, we describe the extraction line optics, present the results of tracking studies, and discuss the extraction line instrumentation. Presented at the 1999 IEEE Particle Accelerator Conference (PAC99) New York City, New York, March 29 – April 2, 1999 1Work supported by Department of Energy contract DE–AC03–76SF00515. THE NEXT LINEAR COLLIDER EXTRACTION LINE DESIGN Y. Nosochkov , T. O. Raubenheimer, K. Thompson and M. Woods Stanford Linear Accelerator Center, Stanford University, Stanford, CA 94309
منابع مشابه
Next Linear Collider Design Status*
The layout of the Next Linear Collider (NLC) has been revised to provide greater physics capabilities and to make the design more cost effective. The basic rf unit for the main linacs uses a solid-state modulator to drive eight 70 MW klystrons with a 3 μs pulse length. The rf power is distributed with a multi-mode Delay Line Distribution System (DLDS) to 8 girders of accelerating structures. Th...
متن کاملTesla Linear Collider Design and R&d Status
This paper summarises the present status of the overall design and of the technical developments for a next generation e+elinear collider based on superconducting linac technology.
متن کاملDesign of Beam Extraction Line for Tesla
In the TESLA superconducting linear collider project, collisions occur at zero crossing angle. The option to rapidly dump the spent beams after the collision has been favoured recently to avoid the inconveniencies of large beam losses and beam line activation. For these reasons, the design of the beam and beamstrahlung extraction lines must be interplayed with those of the final focus optics an...
متن کاملNext-generation Linear Collider Final Focus System Stability Tolerances*
The design of final focus systems for the next generation of linear colliders has evolved largely from the experience gained with the design and operation of the Stanford Linear Collider (SLC) and with the design of the Final Focus Test Beam (FFTB). We will compare the tolerances for two typical designs for a next-generation linear collider final focus system. The chromaticity generated by stro...
متن کاملNew Developments in the next Linear Collider Beam
We review many developments in the design of the Beam Delivery System for the Next Linear Colllider. The collimation system has been redesigned to reduce nonlinearities and ease tolerances, and the IP Switch line has been adjusted to permit a 300 meter longitudinal separation between the two detectors. Magnet designs have been changed to reduce the number of distinct magnet classes, produce a s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1999