Phase error compensation for three-dimensional shape measurement with projector defocusing.

نویسندگان

  • Ying Xu
  • Laura Ekstrand
  • Junfei Dai
  • Song Zhang
چکیده

This paper analyzes the phase error for a three-dimensional (3D) shape measurement system that utilizes our recently proposed projector defocusing technique. This technique generates seemingly sinusoidal structured patterns by defocusing binary structured patterns and then uses these patterns to perform 3D shape measurement by fringe analysis. However, significant errors may still exist if an object is within a certain depth range, where the defocused fringe patterns retain binary structure. In this research, we experimentally studied a large depth range of defocused fringe patterns, from near-binary to near-sinusoidal, and analyzed the associated phase errors. We established a mathematical phase error function in terms of the wrapped phase and the depth z. Finally, we calibrated and used the mathematical function to compensate for the phase error at arbitrary depth ranges within the calibration volume. Experimental results will be presented to demonstrate the success of this proposed technique.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Comparison of the squared binary, sinusoidal pulse width modulation, and optimal pulse width modulation methods for three-dimensional shape measurement with projector defocusing.

This paper presents a comparative study on three sinusoidal fringe pattern generation techniques with projector defocusing: the squared binary defocusing method (SBM), the sinusoidal pulse width modulation (SPWM) technique, and the optimal pulse width modulation (OPWM) technique. Because the phase error will directly affect the measurement accuracy, the comparisons are all performed in the phas...

متن کامل

Generic nonsinusoidal phase error correction for three-dimensional shape measurement using a digital video projector.

A structured light system using a digital video projector is widely used for 3D shape measurement. However, the nonlinear gamma of the projector causes the projected fringe patterns to be nonsinusoidal, which results in phase error and therefore measurement error. It has been shown that, by using a small look-up table (LUT), this type of phase error can be reduced significantly for a three-step...

متن کامل

Three-dimensional shape measurement with binary dithered patterns.

The previously proposed binary defocusing technique and its variations have proven successful for high-quality three-dimensional (3D) shape measurement when fringe stripes are relatively narrow, but they suffer if fringe stripes are wide. This paper proposes to utilize the binary dithering technique to conquer this challenge. Both simulation and experimental results show the phase error is alwa...

متن کامل

A comparison study of digital sinusoidal fringe generation technique: defocusing binary patterns VS focusing sinusoidal patterns

With the recent advancements in digital technology, three-dimensional (3-D) shape measurement has played an increasingly important role in fields including manufacturing, homeland security, medical sciences, and entertainment. Over the past decades, numerous 3D shape measurement techniques have been developed. Among these existing techniques, fringe analysis based on phase-shifting sinusoidal s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Applied optics

دوره 50 17  شماره 

صفحات  -

تاریخ انتشار 2011