Role of Salt Concentration on Conductivity and Discharge Characteristics of PMMA Based Polymer Electrolyte System
نویسندگان
چکیده
Solid polymer electrolyte films based on PMMA were prepared in different NaClO4 salt concentrations by solution cast technique. The features of complexion of these electrolytes were studied by X-ray diffraction (XRD). Film morphology was examined by Scanning Electron Microscopy (SEM). The electrical conductivity of pure and NaClO4 doped polymer electrolyte films was studied in the temperature range 303-393 K. The electrical conductivity increased with increasing dopant concentration and exhibited Arrhenius type dependent with temperature. The increase in conductivity with dopant concentration may be attributed to the formation of charge transfer complexes. Transport number data showed that the charge transport in this electrolyte system is predominately due to ions. Using this polymer electrolyte, solid state electro chemical cell have been fabricated, and their discharge profiles were studied under a constant load of 100 kΩ.
منابع مشابه
STRUCTURAL AND IONIC CONDUCTIVITYSTUDIES ONPLASTICIZED PAN-SODIUM FLUORIDE POLYMER ELECTROLYTES FOR ELECTROCHEMICAL CELL APPLICATIONS
Ion conducting gel polymer electrolytes based on poly acrylonitrle (PAN) complexed with different weight percent ratios of Sodium Fluoride (NaF) salt were prepared by using solution cast technique. Structural characterization was performed using X-ray diffraction (XRD) technique and Fourier transforms infrared (FTIR) spectroscope technique. From the X-rd results increase in amorphous phase with...
متن کاملStudy of MG49-PMMA Based Solid Polymer Electrolyte
The studies of rubber-polymer blends as solid polymer electrolyte for electrochemical devices application have been investigated. The electrolyte films were prepared by solution casting technique. The effect of poly(methyl methacrylate) (PMMA) and lithium tetrafluoroborate (LiBF4), salt concentration on chemical interaction, ionic conductivity, structure and morphology of 49% poly(methyl methac...
متن کاملSynthesis and Characterization of Pmma-based Polymer Gel Electrolyte
PMMA based Polymer Gel Electrolytes have been prepared with different concentrations of salt (NaI) by gelation method. This study has been carried out to understand the effect of salt concentration on conductivity of polymer gel electrolyte. The prepared samples are characterized by XRD, optical microscopy, FTIR and Dielectric spectroscopy. The XRD studies revealed that the prepared polymer gel...
متن کاملEffects of addition of BaTiO3 Nano particles on the conductivity of PVdF/PMMA based polymer blend electrolytes
Composite polymer electrolyte (CPE) membranes, comprising poly (vinylidene fluoride) (PVdF)/poly (methyl methacrylate) (PMMA), BaTiO3 as ceramic filler and LiBF4 as the lithium salt were prepared using a solution casting technique. The prepared membranes were subjected to XRD, FT-IR, impedance spectroscopy and thermal stability studies. The incorporation of nanofiller greatly enhanced the ionic...
متن کاملStructural and DC Ionic conductivity studies of carboxy methylcellulose doped with ammonium nitrate as solid polymer electrolytes
Solid polymer electrolytes have been prepared by solution casting technique. Carboxy methylcellulose (CMC)-ammonium nitrate (AN) films were studied with varied AN salt concentration from 5-50 wt.% at ambient temperature. X-ray diffraction (XRD) pattern shows the amorphous nature of polymer electrolyte samples. IR-spectra confirm the polymer-salt complexes in the range of 1633 829 cm -1 . Impeda...
متن کامل