On the Use of Homogenization Theory to Design Optimal Piezocomposites for Hydrophone Applications
نویسندگان
چکیده
We consider an optimal design of composite hydrophones consisting of parallel piezoelectric PZT rods that are embedded in a porous polymer matrix. Given the material properties of the polymer and PZT ceramic, we have optimally designed the piezocomposite to maximize the hydrostatic coupling factor, hydrophone figure of merit, or electromechanical coupling factor, using the methods of homogenization theory. The optimal composite is obtained by using a two-step procedure : (i) first we find the ideal structure of the matrix material by weakening the polymer by an optimal arrangement of pores, and (ii) then we embed the PZT rods in this matrix. The design parameters are the shape, volume fraction, and spatial arrangement of the piezoceramic rods, and the structure of the matrix material. It turns out that the optimal matrix is highly anisotropic and is characterized by negative Poisson’s ratios in certain directions. The optimal composites possess performance characteristics that are significantly higher than those of a piezocomposite with an isotropic polymer matrix. The results can be viewed as theoretical upper bounds on the hydrophone performance.
منابع مشابه
Design of smart composite materials using topology optimization
The topology optimization method is used to find the distribution of material phases that extremizes an objective function (e.g., thermal expansion coefficient, piezoelectric coefficients etc) subject to constraints, such as elastic symmetry and volume fractions of the constituent phases, within a periodic base cell. The effective properties of the material structures are found using a numerica...
متن کاملOn the design of 1-3 piezocomposites using topology optimization
We use a topology optimization method to design 1-3 piezocomposites with optimal performance characteristics for hydrophone applications. The performance characteristics we focus on are the hydrostatic charge coefficient d spd h , the hydrophone figure of merit d spd h g spd h , and the electromechanical coupling factor k spd h . The piezocomposite consists of piezoelectric rods embedded in an ...
متن کاملFinite Element Modelling of 3-3 Piezocomposites
Efforts to improve the properties and reliability of piezoelectric materials have often concentrated on processing dense ceramic material by techniques such as fine particle size powder production, grain size control, hot pressing, hot isostatic pressing and controlled atmosphere sintering [1–3]. However, it has been shown that lowering the density and introducing significant amounts of open po...
متن کاملControl Theory and Economic Policy Optimization: The Origin, Achievements and the Fading Optimism from a Historical Standpoint
Economists were interested in economic stabilization policies as early as the 1930’s but the formal applications of stability theory from the classical control theory to economic analysis appeared in the early 1950’s when a number of control engineers actively collaborated with economists on economic stability and feedback mechanisms. The theory of optimal control resulting from the contributio...
متن کاملFinite element modelling of dense and porous piezoceramic disc hydrophones.
The acoustic characteristics of dense and porous piezoceramic disc hydrophones have been studied by finite element modelling (FEM). The FEM results are validated initially by an analytical model for a simple disc of dense piezoceramic material and then it is extended to a porous piezoceramic disc replicating a foam-reticulated sample. Axisymmetric model was used for dense piezoceramic hydrophon...
متن کامل