Analysis of flow and heat transfer inside oscillatory squeezed thin films subject to a varying clearance
نویسندگان
چکیده
The flow and heat transfer inside a non-isothermal and incompressible thin film having its upper plate slightly inclined from the horizontal and undergoing an oscillatory squeezing motion is investigated in this work. Two models are analyzed: low and large Reynolds number flow models. The corresponding governing equations for each model are properly non-dimensionalized and solved numerically. The main controlling parameters for the dynamic and thermal behavior of the inclined thin film are found to be the amplitude of the upper plate motion, squeezing Reynolds number, squeezing number, thermal squeezing parameter and the dimensionless slope of the upper plate. It is found that fluctuations in the axial and normal velocities are greater for convergent thin films than for divergent thin films. Furthermore, Nusselt numbers and their amplitudes are found to decrease with an increase in the dimensionless slope of the upper plate. Finally correlations are obtained for Nusselt numbers and their corresponding amplitudes for two different thermal conditions: constant wall temperature and uniform wall heat flux. 2002 Elsevier Science Ltd. All rights reserved.
منابع مشابه
Heat Transfer and Hydromagnetic Control of Flow Exit Conditions inside Oscillatory Squeezed Thin Films
The influence of fluids inertia and the effects of the presence of a magnetic field normal to the direction of the flow of an electrically conducting fluid are studied on flow and heat transfer inside a nonisothermal and incompressible thin film undergoing oscillatory squeezing. The governing equations have been nondimensionalized and solved numerically. Further, the influence of the squeezing ...
متن کاملAnalysis of fully developed flow and heat transfer through n-sided polygonal ducts with round corners using the Galerkin weighted residual method
The Galerkin weighted residuals method is extended solve the laminar, fully developed flow and heat transfer of Al2O3-water nanofluid inside polygonal ducts with round corners for the constant heat flux and uniform wall temperature boundary conditions. Using the method, semi-analytical, closed-form solutions are obtained for the friction coefficient and the Nusselt number in terms of the radius...
متن کاملHeat transfer enhancement due to air bubble injection into a horizontal double pipe heat exchanger
If an air flow is injected into a liquid fluid, many ambulant air bubbles are formed inside the fluid. Air bubbles move inside the liquid fluid because of the buoyancy force, and the mobility of these air bubbles makes sizable commixture and turbulence inside the fluid. This mechanism was employed to enhance the heat transfer rate of a horizontal double pipe heat exchanger in this paper. Howeve...
متن کاملEntropy generation calculation for laminar fully developed forced flow and heat transfer of nanofluids inside annuli
In this paper, second law analysis for calculations of the entropy generation due to the flow andheat transfer of water-Al2O3 and ethylene glycol-Al2O3 nanofluids inside annuli is presented. Thephysical properties of the nanofluids are calculated using empirical correlations. Constant heatfluxes at inner surface of the annuli are considered and fully developed condition for fluid flowand heat t...
متن کاملConvective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube
Abstract An empirical investigation was carried out to study convective heat transfer of nanofluid flow inside an inclined copper tube under uniform heat flux condition. Required data are acquired for laminar and hydrodynamically fully developed flow inside round tube. The stable CuO-base oil nanofluid with different nanoparticle weight fractions of 0.5%, 1% and 2% was produced by means of ul...
متن کامل