Summary, Working Group 1: Electron guns and injector designs
نویسندگان
چکیده
We summarize the proceedings of Working Group 1 of the 2005 Energy Recovery Linac (ERL) Workshop. The subject of this working group, the electron gun and injector design, is arguably the most critical part of the ERL as it determines the ultimate performance of this type of accelerators. Working Group 1 dealt with a variety of subjects: The technology of DC, normal-conducting RF and superconducting RF guns; beam dynamics in the gun and injector; the cathode and laser package; modeling and computational issues; magnetized beams and polarization. A short overview of these issues covered in the Working Group is presented in this paper. r 2005 Published by Elsevier B.V.
منابع مشابه
Optics and beam transport in energy recovery linacs
Here, we report on the working group ‘‘Optics and Beam Transport’’ of the 2005 Energy-Recovery-Linac Workshop. This workshop also had working groups on ‘‘Electron Guns and Injector Designs’’, ‘‘Superconducting RF and RF Control’’, and ‘‘Synchronization and Diagnostics/Instrumentation’’. Here, we are concerned with the many different ERL proposals that international laboratories have been workin...
متن کاملIon Tracking in Photocathode RF Guns
Projected next-generation linac-based light sources such as PERL or the TESLA free-electron laser (FEL) generally assume, as essential components of their injector complexes, long-pulse photocathode rf electron guns. These guns, due to the nature in which they are operated, may be more susceptible to ion bombardment damage of their cathodes than conventional rf guns. This paper explores this po...
متن کاملRf Focussing - an Instrument for Beam Quality Improvement in Superconducting Rf Guns
Rf electron guns require an external magnetic field focussing to produce a low emittance electron beam. A dc magnetic field focuses electrons in the beam already inside the cavity as they leave the photocathode. In superconducting rf guns (srf) the possibility of external magnetic focussing is quite limited. In this paper we investigate an effect of rf focussing in the first half cell of a 3+1/...
متن کاملA Polarized Electron PWT Photoinjector for the ILC
In order to provide maximum physics benefits, the International Linear Collider (ILC) must have a highly polarized electron beam with a low emittance. High electron spin -polarization (>85%) is attainable with a modern GaAs photocathode illuminated by a circularly polarized laser. Low emittance is achievable with an rf photoinjector, and can be further improved with a round-to-flat beam transfo...
متن کاملThe Lcls-ii Injector Design*
The new LCLS-II project will construct a 4 GeV continuous wave (CW) superconducting linear accelerator to simultaneously feed two undulators which will cover the spectral ranges 0.2-1.2 keV and 1-5 keV, respectively. The injector must provide up to 300 pC/bunch with a normalized emittance < 0.6 m and peak current > 30 A at up to 1 MHz repetition rate. An electron gun with the required brightne...
متن کامل