The Photoacoustic Spectroscopy Applied in the Characterization of the Cross-linking Process in Polymeric Materials
نویسندگان
چکیده
In this work we used the Photoacoustic Spectroscopy (PAS) to evaluate the crosslinking of the copolymer from ethylene vinyl trimethoxysilane (EVS) and the grafted vinyl trimethoxysilane (VTS) on low density polyethylene (LDPE). PAS is used for sounding the overtone bands and stretching frequencies combinations of the groupings -Si-OH, =CH2, -CH3 and -CH2-CH3, in the near and medium infrared range. The samples were typically prepared with 3%, 5% and 7% of catalyst and crosslinked in the temperatures of 70, 80 and 90C. Using the overtone bands of -OH groups the PAS shows the optimum combination, pointing a better crosslinking e ect for 80C and in the range 5% to 7% of catalyst, typically.
منابع مشابه
Characterization and quantification of the cross-linking of linear low density polyethylene with silane grafting by Fourier transform infrared (FTIR) spectroscopy
The way of making cross-linkable polyethylene through silane grafting has gained much attention in recentyears because of its various advantages such as easy processing, low cost and capital investment andfavorable properties in the processed materials. This work deals with silane grafting and moisture crosslinkingof linear low density polyethylene (LLDPE). The grafting reaction was performed i...
متن کاملStudy on Synthesis and Characterization of Unsaturated Poly (ester-amide) as Bone Fixation Materials
A new type of unsaturated poly ester-amide was prepared by melt polycondensation and characterized completely. Influence of heat treatment conditions and cross-linking content on mechanical and degradation properties of unsaturated polyester-amide were studied. Results suggested that the newly synthesized unsaturated poly(ester-amide) possessed good heat stabilization properties. Mechanical...
متن کاملEffect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy
In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...
متن کاملSynthesis of some network polymers with siloxane units as a drug delivery system
New biodegradable network polymers containing siloxane-linked polymeric prodrugs of 5-ammino-2-hydroxybenzoic acid (5-ASA) in the main chain were prepared by ter polymerization of methacrylic acid (MA), 2-hydroxyethylmethacrylate (HEMA), and bis (trimethylsilyloxy) methylsilane (VBM) in the presence of some new cross-linking agents.The monomers and polymers were characterized by FT-IR and 1H-NM...
متن کاملEffect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy
In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...
متن کامل