Assessing heating distribution by therapeutic ultrasound on bone phantoms and in vitro human samples using infrared thermography.

نویسندگان

  • Gabriella Sellani
  • Dalila Fernandes
  • Abigail Nahari
  • Melissa Fabrício de Oliveira
  • Christiana Valois
  • Wagner C A Pereira
  • Christiano B Machado
چکیده

BACKGROUND Bioheat models have been proposed to predict heat distribution in multilayered biological tissues after therapeutic ultrasound (TUS) stimulation. However, evidence on its therapeutic benefit is still controversial for many clinical conditions. The aim of this study was to evaluate and to compare the TUS heating distribution on commercially available bone phantoms and in vitro femur and tibia human samples, at 1 MHz and several ultrasonic pulse regimens, by means of a thermographic image processing technique. METHODS An infrared camera was used to capture an image after each 5-min 1-MHz TUS stimulation on bone phantoms, as well as in vitro femur and tibia samples (N = 10). An intensity-based processing algorithm was applied to estimate temperature distribution. Sections of five femurs in the coronal plane were also used for the evaluation of heat distribution inside the medullar canal. RESULTS Temperature increased up to 8.2 and 9.8 °C for the femur and tibia, respectively. Moreover, the temperature increased up to 10.8 °C inside the medullar canal. Although temperature distributions inside the region of interest (ROI) were significantly different (p < 0.001), the average and standard deviation values for bone phantoms were more similar to the femur than to the tibia samples. Pulsed regimens caused lower increments in temperature than continuous sonication, as expected. CONCLUSIONS Commercially available bone phantoms could be used in research focusing on thermal effects of ultrasound. Small differences in mean and standard deviation temperatures were observed between bone samples and phantoms. Temperature can reach more than 10 °C inside the medullar canal on a fixed probe position which may lead to severe cellular damage.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Detection of Composite Delamination Damage based on Ultrasonic Infrared Thermography

An experimental setup is designed to detect composite delamination damage based on ultrasonic infrared thermography. The ultrasonic infrared thermography system is composed by ultrasonic excitation system, infrared thermal imager and data acquisition system and two damaged composite plate specimens are produced in the experiment. The image processing methods including thresholding, filters, edg...

متن کامل

A new thermography-based approach to early detection of cancer utilizing magnetic nanoparticles theory simulation and in vitro validation.

This work describes the utilization of tumor-specific magnetic nanoparticles together with an alternating magnetic field as a means to thermally mark a tumor so as to detect it using a thermal imaging system. Experiments were conducted using an in vitro tissue model, an inductive heating system, and an infrared camera. The thermal images, recorded by the infrared camera during the experiments, ...

متن کامل

Induction of a bystander effect after therapeutic ultrasound exposure in human melanoma: In-vitro assay

Background: The induction of bystander effect via ionizing radiation has been well proven. However, few studies have investigated the bystander effect following non-ionizing radiation, such as ultrasound waves. Here, the bystander effect after different sonication times on human melanoma cell line (A375), is evaluated by assessing cell viability and apoptosis. Materials and Methods: The cells w...

متن کامل

Non-Destructive Testing of Carbon Fiber Reinforced Plastic by Infrared Thermography Methods

Composite materials are one answer to the growing demand for materials with better parameters of construction and exploitation. Composite materials also permit conscious shaping of desirable properties to increase the extent of reach in the case of metals, ceramics or polymers. In recent years, composite materials have been used widely in aerospace, energy, transportation, medicine, etc. Fiber-...

متن کامل

DETECTING DEFECTS in REINFORCED CONCRETE USING the METHOD of INFRARED THERMOGRAPHY

This paper presents a method for detecting defects in reinforced concrete structures by using the method of active infrared (IR) thermography. Non-destructive testing using infrared (IR) thermography consists of thermal stimulation of the object of interest and monitoring of the surface temperature variation during the transient cooling or heating process. The paper includes short descriptions ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of therapeutic ultrasound

دوره 4  شماره 

صفحات  -

تاریخ انتشار 2016