Control of Posture and Tool Location Using a Single Force/Torque Sensor
نویسنده
چکیده
This paper describes a control scheme combining a mobile platform which is commanded at the velocity level with a position controlled robot arm. Based on separate controllers for both subsystems a method for force guidance is proposed which provides control of the tool location and of the posture of the mobile platform. Only a single force/torque sensor is used for this purpose. Also the slower dynamic response of the mobile platform compared to the manipulator is taken into account. Preferred configurations of the arm where the highest manipulability is provided are used for the underlying coordination.
منابع مشابه
Torque Control of Brushless Direct Current Motor Drives Using Single Current Sensor with High Reliability
Due to the simple structure, high torque density, low maintenance, and high efficiency, brushless direct current (BLDC) motors are widely used in automation and industrial applications. A control strategy based on single current sensor is proposed for a four-switch three-phase BLDC motor system to lower cost and improve reliability. The whole working process of the BLDC motor is divided into si...
متن کاملFlexible Foot/Ankle Based on PKM with Force/Torque Sensor for Humanoid Robot
This paper describes the development of a novel humanoid robot foot/ankle based on an orientation Parallel Kinematic Mechanism for intelligent and flexible control. With three identical Universal-Prismatic-Spherical prismatic-actuated limbs and a central Universal-Revolute passive limb, the PKM can perform three degrees of freedom rotation motions. In order to enable the humanoid robot safely t...
متن کاملA standing posture control based on ground reaction force
Several forces are always exerted to the locomotion systems such as inertial forces, gravitational forces, and ground reaction forces. Among them, we here focus on the ground reaction forces to consider the balance control of the simple two-link model in the sagittal plane, which contains one actuator at the ankle and two force sensors on the sole. To keep the balance, it is necessary that the ...
متن کاملDecentralized Control of Multiple Mobile Robots Transporting a Single Object in Coordination without Using Force/Torque Sensors
In this paper, we propose a decentralized control system of multiple mobile robots transporting a single object in coordination without using force/torque sensors. In this system, each robot is controlled as if it has a specified impedance dynamics without using a force/torque sensor. The robots transport an object in coordination using a leader-follower type control algorithm. The effect of pa...
متن کاملModeling of Hand-arm System for Studying the Dynamic Effects of Impact Generated by Fastening of Shear-type Fasteners
The aim of this study is to model the hand–arm system during fastening operation using shear fasteners. Fastening using powered hand-tool generates considerable dynamic forces caused by the impact delivered to the hand–arm at the end of the operation because of fastener shear-off. The hand–arm is modeled as a rotational single-degree-of-freedom system. The values of the model parameters are obt...
متن کامل