Coagulation efficiency and floc structural characteristics of ferrum-polymer dual-coagulant for treatment of synthetic dyes wastewater
نویسندگان
چکیده
In this study, the cationic lignin-based flocculant was prepared and used with polyferric chloride (PFC) to treat disperse and reactive dyes wastewater. The effects of dosage, initial pH, hardness and ionic strength on the interactions and floc properties were studied. Results showed that hydroxyl and quaternary ammonium groups of LBF could combine with -NHand sulfo groups of dyes. Large flocs with extended structure were formed due to the absorption bridging and charge neutralization effect of LBF. Solution pH had a significant effect on floc size and compactness by the variance of Fe(III) hydrolysates and charge of LBF. Moderate hardness and ionic strength both could improve floc properties but the mechanisms were different: Ca ions could combine with hydroxyl and sulfo groups to produce chelates and decrease the electric repulsion simultaneously, Na ions only compressed the electric double layer. Excess hardness and ionic strength showed a slight influence because of the limited binding sites and strong electric repulsion, respectively.
منابع مشابه
Comparison of a novel polytitanium chloride coagulant with polyaluminium chloride: coagulation performance and floc characteristics.
Polymerized inorganic coagulants are increasingly being used in the water supply and wastewater treatment process, yet there is limited research on the development of polytitanium coagulants. The aim of this study is to synthesize polytitanium chloride (PTC) coagulants and investigate their coagulation behavior and floc characteristics for humic acid removal in comparison to polyaluminum chlori...
متن کاملUse of natural coagulants for industrial wastewater treatment
Industrial effluents are a menace to the environment and the fact that their characteristics vary from industry-to-industry only adds to the complex challenge they offer to the engineers and scientists. Resource-efficient and environment-friendly solutions to this hazard are a call of the hour. Coagulation, by synthetic chemicals, has been used as a cost-effective and efficient method for manag...
متن کاملTreatment of Synthetic Textile Wastewater by Combination of Coagulation/Flocculation Process and Electron Beam Irradiation
Introduction: Textile wastewaters from dyeing and finishing processes are heavily polluted with dyes, textile auxiliaries and chemicals and have a broad range of pH, high COD concentration and suspended particles. In this study, the efficiency of color and turbidity removal from synthetic textile wastewater samples were investigated by combined process of coagulation/ flocculation and electron ...
متن کاملWastewater Treatment of Stone Cutting Industries by Coagulation Process
Background & Aims of the Study: The wastewater created as a result of stone cutting industries enters some pools for re-consumption so that its suspended solids settle by gravity. By taking to account the high volume of water and sludge, treatment of wastewater and removal of sludge cause many problems for stone cutting units. The objective of this study was to determine the quality of wast...
متن کاملبررسی کارائی فرایند ترکیبی انعقاد و اکسیداسیون پیشرفته شبه فنتون در حذفCOD فاضلاب سنتتیک آنتیبیوتیک کلاریترومایسین از فاضلاب
Antibiotics are considered among the major pollutants in water environments. In this study, elimination of Claritromycin antibiotic has been studied from synthetic wastewater by combined coagulation and advanced oxidation process. Materials and Methods: This study was done in laboratory scale . Samples of synthetic wastewater were prepared from Claritromycin antibiotic. Concentration of samp...
متن کامل