Influence of brine spray system on the thermal salt recrystallisation process by dynamic simulation
نویسندگان
چکیده
A distributed dynamic model was built using gPROMS 2.3.7 language for an integrated Process including a cogeneration system, a plate heat exchangers set and a salt recrystallization process. It was analyzed the effect of a simulated spray system model on the integrated process, by comparing the global performance of the system with and without sprays. Due to air drift issues, quasi-random time daily profiles for the allowed operation of the spray system (on-off working time periods) were created. Using three distinctive atmospheric scenarios, several ponds spray distributions schemes were analysed. A sensibility analysis of the salt production was considered by changing the brine flow rate fraction entering in the ponds through taps and by sprays.
منابع مشابه
Comparison between the SBF response of hydroxyapatite coatings deposited using both a plasma-spray and a novel co-incident micro-blasting technique J.N.Barry, D.P.Dowling
This paper reports on the response of hydroxyapatite (HA) coatings, fabricated using two deposition technologies, to immersion in simulated body fluid (SBF). The deposition methods used were: plasma spray, a commercial standard, and CoBlast, a novel low temperature microblast technique. In the case of the latter, HA coatings are deposited by simultaneous blasting HA and abrasive powders concent...
متن کاملStudies of Evaporative Efficiency by Dynamic Simulation of an Open Integrated Industrial System
The aim of this study is to perform a dynamic modelling and simulation of a Portuguese industrial integrated system in order to analyse the integration and feasibility of the different units, maximizing its efficiency and minimizing its environmental damage, and to study the effect of some operational and atmospheric conditions on the system. For this purpose it was built a dynamic model of the...
متن کاملProcess Integration of a Dynamic Industrial System
The aim of this study is to obtain a dynamic modelling and simulation of a Portuguese industrial integrated system composed of three different processes. This work includes the analysis of the optimal integration of the different units, and the study of the effect of some operational and atmospheric conditions on the system to maximize its global thermal efficiency. The cogeneration system was ...
متن کاملTransient thermal study of recuperative tube in tube heat exchanger operating in refrigeration system using experimental test and mathematical simulation
Joule-Thomson cooling systems are used in refrigeration and liquefaction processes. There are extensive studies on Joule-Thomson cryogenic systems, but most of them coverage steady state conditions or lack from experimental data. In the present work, transient thermal behavior of Joule-Thomson cooling system including counter current helically coiled tube in tube heat exchanger, expansion valve...
متن کاملPlasma spraying and characterization of chromium carbide – nickel chromium coatings
Chromium carbide – nickel chromium powder Cr3C2-25wt.NiCr was plasma sprayed by a water-stabilized system WSP®. A series of experiments with variable feeding distance was carried out. Basic characterization of coatings was done by XRD, SEM and light microscopy plus image analysis. Microhardness was measured on polished cross sections. The main focus of investigation was on resistances against w...
متن کامل