Software and Hardware Control of a Hybrid Robot for Switching between Leg-type and Wheel-type Modes
نویسندگان
چکیده
One of the objectives of the paper is to describe the hybrid robot PEOPLER-II (Perpendicularly Oriented Planetary Legged Robot) with regard to switching between leg-type and wheel-type. Our robot has an easier design and control system than other hybrid robots. The software and hardware control in the process of performing five robot tasks are considered. These are the walking, rolling, switching, turning and spinning. In the switching task, we show the control method based on minimization of total energy cost. Also, the hardware components and their interconnections are described. The graphical user interfaces utilized in the simulation and experiment are demonstrated. The walking, rolling and the switching without reverse rotation and arm motion are verified in simulation and with real robot, in addition to turning and spinning.
منابع مشابه
Control of a Robotic Wheel-Chair Prototype for People with Walking Disabilities
In this paper we present a system that could be used to help people with walking disabilities. A system consists of a prototype mobile robot platform equipped with a control board and a remote computer system, running with image processing algorithms, was used to develop a system for physically disabled human to move freely in an environment. We used a camera to get visual information by a huma...
متن کاملA Microprocessor-Based Hybrid Duplex Fault-Tolerant System
Reliability is one of the fundamental considerations in the design of industrial control equipment. The microprocessor-based Hybrid Duplex fault-tolerant System (HDS) proposed in this paper has high reliability to meet this demand although its hardware structure is simple. The hardware configuration of HDS and the fault tolerance of this system are described. The switching control strategies in...
متن کاملFailure Mode and Analysis of the Bonded/bolted Joints between a Hybrid Fibre Reinforced Polymer and Aluminium Alloy
Composites are being used extensively in several engineering applications. However, the efficiency of the joints used in joining composites and metals can be improved. To move towards a sustainable and environment friendly future, natural fibre composite material was used. Towards the above objective, research work was carried out for the assembly between a composite and aluminium. Three differ...
متن کاملDesign and development of a leg-wheel hybrid robot "HyTRo-I"
This paper proposes a novel and mechanically decoupled leg and wheel hybrid transformable robot called HyTRo-I that combines two mobility concepts. For example, while wheeled vehicles shares higher speed than legged and tracked machines on a flat ground, they have relatively lower degree of flexibility than the other two on irregular terrain. The HyTRo-I robot evolves three motion modes: wheele...
متن کاملDesign and Locomotion Modes of a Small Wheel- Legged Robot
Legged robots have superior terrain adaptability comparing to traditional wheeled vehicles. They also offer attractive capabilities in terms of agility and obstacle avoidance. On the other hand, traditional wheeled platforms provide sufficient robustness, mechanical simplicity and energetic performance. They are fast, powerful in terms of load to weight ratio, stable, and easy to control. Hybri...
متن کامل