A Model of Material with Phase Change and Applications
نویسندگان
چکیده
The macroscopic model of solid-solid phase change presented makes use of internal variables to represent the phase fractions and the local strains. As such, it can be cast in the framework of standard materials with internal constraints. These constraints are accounted for by Lagrange's multipliers. Reversible or irreversible phase changes are considered in a general way. Material stability is also discussed. Two examples are provided to illustrate the application of the proposed model to brittle damage and to shape memory materials. This model enable to solve boundary value problems as it is shown for the anti-plane shear crack one.
منابع مشابه
A Comprehensive Study on a Latent Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses
Abstract Energy crisis is a major challenge in the current world. Latent heat thermal energy storage (LHTES) systems are known as equipment with promising performance by which thermal energy can be recovered. In the present study a comprehensive theoretical and experimental investigation is performed on a LHTES system containing PEG1000 as phase change material (PCM). Discussed topics can be ca...
متن کاملEffect of Using Nano Encapsulated Phase Change Material on Thermal Performance of Micro Heat Sink
The aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (NEPCM) slurry as a cooling fluid instead of pure fluid. A threedimensional model of a circular channel using water slurry of NEPCM was developed. The results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...
متن کاملAn Algorithm based on Predicting the Interface in Phase Change Materials
Phase change materials are substances that absorb and release thermal energy during the process of melting and freezing. This characteristic makes phase change material (PCM) a favourite choice to integrate it in buildings. Stephan problem including melting and solidification in PMC materials is an practical problem in many engineering processes. The position of the moving boundary, its veloci...
متن کاملA robust wavelet based profile monitoring and change point detection using S-estimator and clustering
Some quality characteristics are well defined when treated as response variables and are related to some independent variables. This relationship is called a profile. Parametric models, such as linear models, may be used to model profiles. However, in practical applications due to the complexity of many processes it is not usually possible to model a process using parametric models.In these cas...
متن کاملScattering mechanism of nonmagnetic phase on nano diluted magnetic semiconductors (DMS)
This paper shows the scattering mechanism at diluted magneticsemiconductors. The doped magnetic atom produces a scattering potential due to becoupled of itinerant carrier spin of host material with magnetic momentum of the dopedmagnetic atom. Formulas of scattering event were rewritten by the plane waveexpansion and then the electron mobility of DMS was calculated. Calculations showKondo effect...
متن کاملDevelopment of a phase change model for volume-of-fluid method in OpenFOAM
In this present study, volume of fluid method in OpenFOAM open source CFD package will be extended to consider phase change phenomena with modified model due to condensation and boiling processes. This model is suitable for the case in which both unsaturated phase and saturated phase are present and for beginning boiling and condensation process needn't initial interface. Both phases (liquid-va...
متن کامل