streaky structure in a turbulent boundary fayer on a cylinder
نویسندگان
چکیده
A near-wall streaky structure has been identified in a turbulent boundary layer on a cylinder in axial flow. A platinum wire looped around a cylinder moving in a tank of quiescent water was used to generate hydrogen bubbles near the wall of the cylinder. The streaks that were visualized correspond to high-speed streaks identified by Kline et al. [J. Fluid Mech. 30, 741 (1967)]. The appearance, motion, and spacing of the streaks appear similar to the streaky structure in a planar boundary layer, suggesting a similarity in the mechanism for the generation of turbulence in the boundary layers on a flat plate and on a cylinder.
منابع مشابه
Numerical Simulation of Separation Bubble on Elliptic Cylinders Using Three-equation k-? Turbulence Model
Occurrence of laminar separation bubbles on solid walls of an elliptic cylinder has been simulated using a recently developed transitional model for boundary layer flows. Computational method is based on the solution of the Reynolds averaged Navier-Stokes (RANS) equations and the eddy-viscosity concept. Transitional model tries to simulate streamwise fluctuations, induced by freestream turbulen...
متن کاملBoundary Layers and Heat Transfer on a Rotating Rough Disk
The study of flow and heat transfer over rotating circular disks is of great practical importance in understanding the cooling of rotatory machinery such as turbines, electric motors and design and manufacturing of computer disk drives. This paper presents an analysis of the flow and heat transfer over a heated infinite permeable rough disk. Boundary-layer approximation reduces the elliptic Nav...
متن کاملDirect Numerical Simulation of the Wake Flow Behind a Cylinder Using Random Vortex Method in Medium to High Reynolds Numbers
Direct numerical simulation of turbulent flow behind a cylinder, wake flow, using the random vortex method for an incompressible fluid in two dimensions is presented. In the random vortex method, the primary variable is vorticity of the flow field. After generation on the cylinder wall, it is followed in two fractional time step in a Lagrangian system of coordinates, namely convection and diffu...
متن کاملThe Effect of Square Splittered and Unsplittered Rods in Flat Plate Heat Transfer Enhancement
A square splittered and unsplittered rod is placed in a turbulent boundary layer developed over a flat plate. The effect of the resulting disturbances on the local heat transfer coefficient is then studied. In both cases the square rod modifies the flow structure inside the boundary layer. As a result, a stagnation point, a jet and wake area are generated around the square rod, each making a co...
متن کاملModelling of Effect of Inflow Turbulence on Large Eddy Simulation of Bluff Body Flows
A random flow generation (RFG) algorithm for a previously established large eddy simulation (LES) code is successfully incorporated into a finite element fluid flow solver to generate the required inflow/initial turbulence boundary conditions for the LES computations of viscous incompressible turbulent flow over a nominally twodimensional circular cylinder at Reynolds number of 140,000. The eff...
متن کامل