A statistical approach for the computation of the forward kinematic model of redundantly actuated mechanisms
نویسندگان
چکیده
The forward kinematic model (FKM) of a redundantly actuated robot is not unique: if each actuator is equipped with an encoder, there are more joint data than strictly necessary for computing nacelle position. It is then possible to fuse competitive data to find the nacelle position. This paper proposes then a method based on a probabilistic approach to determine how computing the FKM to obtain, in terms of probability, the lowest Cartesian error.
منابع مشابه
Simulation-based actuator selection for redundantly actuated robot mechanisms
This article presents a simulation-based strategy for sizing the actuators of a redundantly actuated robotic mechanism. The class of robotic mechanisms we consider may contain one or more closed loops and possess an arbitrary number of active and passive joints, and the number of actuators may exceed themechanism’s kinematic degrees of freedom. Our approach relies on a series of dynamic simulat...
متن کاملKinematic Mapping and Forward Kinematic Problem of a 5-DOF (3T2R) Parallel Mechanism with Identical Limb Structures
The main objective of this paper is to study the Euclidean displacement of a 5-DOF parallel mechanism performing three translation and two independent rotations with identical limb structures-recently revealed by performing the type synthesis-in a higher dimensional projective space, rather than relying on classical recipes, such as Cartesian coordinates and Euler angles. In this paper, Study's...
متن کاملKinematic Calibration for Redundantly Actuated Parallel Mechanisms
We present a new kinematic calibration algorithm for redundantly actuated parallel mechanisms, and illustrate the algorithm with a case study of a planar seven-element 2-degree-of-freedom (DOF) mechanism with three actuators. To calibrate a nonredundantly actuated parallel mechanism, one can find actual kinematic parameters by means of geometrical constraint of the mechanism’s kinematic structu...
متن کاملDesign and analysis of a redundantly actuated parallel mechanism for rapid machining
This paper describes the design, construction, and performance analysis of the Eclipse, a redundantly actuated six-degree-of-freedom parallel mechanism intended for rapid machining. The Eclipse is a compact mechanism capable of performing five-face machining in a single setup while retaining the advantages of high stiffness and high accuracy characteristic of parallel mechanisms. We compare num...
متن کاملEnergy Dissipation Rate Control Via a Semi-Analytical Pattern Generation Approach for Planar Three-Legged Galloping Robot based on the Property of Passive Dynamic Walking
In this paper an Energy Dissipation Rate Control (EDRC) method is introduced, which could provide stable walking or running gaits for legged robots. This method is realized by developing a semi-analytical pattern generation approach for a robot during each Single Support Phase (SSP). As yet, several control methods based on passive dynamic walking have been proposed by researchers to provide an...
متن کامل