Anisotropic TixSn1-xO2 nanostructures prepared by magnetron sputter deposition
نویسندگان
چکیده
Regular arrays of TixSn1-xO2 nanoflakes were fabricated through glancing angle sputter deposition onto self-assembled close-packed arrays of 200-nm-diameter polystyrene spheres. The morphology of nanostructures could be controlled by simply adjusting the sputtering power of the Ti target. The reflectance measurements showed that the melon seed-shaped nanoflakes exhibited optimal properties of antireflection in the entire visible and ultraviolet region. In addition, we determined their anisotropic reflectance in the direction parallel to the surface of nanoflakes and perpendicular to it, arising from the anisotropic morphology.
منابع مشابه
Sn-doped TiO2 modified carbon to support Pt anode catalysts for direct methanol fuel cells
Catalyst supports are known to play important role in governing overall catalyst activity and durability. Here, a new type of SnO2eTiO2 solid solution (TixSn1-xO2) support was prepared via a solvothermal method with substitution of Ti4þ by Sn4þ in the TiO2 lattice. Furthermore, the TixSn1-xO2 was combined with conventional carbon black (Vulcan XC-72) to prepare a hybrid support (TixSn1-xO2eC) f...
متن کاملCharacterization and Performance of LiFePO4 Thin-Film Cathodes Prepared with Radio-Frequency Magnetron-Sputter Deposition
Characterization and Performance of LiFePO4 Thin-Film Cathodes Prepared with Radio-Frequency Magnetron-Sputter Deposition Jian Hong,* Chunsheng Wang,** Nancy J. Dudney,** and Michael J. Lance Department of Chemical Engineering, Tennessee Technological University, Cookeville, Tennessee 38505, USA Department of Chemical and Biochemical Engineering, University of Maryland, College Park, Maryland 2...
متن کاملDesign issues in ionized metal physical vapor deposition of copper
The filling of deep vias and trenches with metal for interconnect layers in microelectronic devices requires anisotropic deposition techniques to avoid formation of voids. Ionized metal physical vapor deposition ~IMPVD! is a process which is being developed to address this need. In IMPVD, a magnetron sputter deposition source is augmented with a secondary plasma source with the goal of ionizing...
متن کاملUltraviolet laser crystallized ZnO:Al films on sapphire with high Hall mobility for simultaneous enhancement of conductivity and transparency
Articles you may be interested in Room temperature deposition of alumina-doped zinc oxide on flexible substrates by direct pulsed laser recrystallization Appl. Optical and electrical properties of transparent conducting B-doped ZnO thin films prepared by various deposition methodsa) Structural, electrical, and optical properties of transparent conductive oxide ZnO:Al films prepared by dc magnet...
متن کاملHigh quality MgB 2 thin films in - situ grown by dc magnetron sputtering
Thin films of the recently discovered magnesium diboride (MgB2) intermetallic superconducting compound have been grown using a magnetron sputtering deposition technique followed by in-situ annealing at 830°C. High quality films were obtained on both sapphire and MgO substrates. The best films showed maximum Tc = 35 K (onset), a transition width of 0.5 K, a residual resisitivity ratio up to 1.6,...
متن کامل