Investigation on the Pressure Pulsation in the Discharge Muffler of Rotary Compressors
نویسندگان
چکیده
Gas pulsation in the discharge side of rotary compressor is one of the main sources of noise, so the discharge muffler is widely used to decrease the gas pulsation and noise level. Investigations on pressure pulsation in the muffler can provide not only a method to evaluate the muffler design and modification, but also a base for advanced study of noise in rotary compressor. In this paper the mathematical model of pressure pulsation in the muffler is built up by Helmholtz resonator approach and coupled with the valve dynamic model and thermodynamic model in the cylinder to simulate the gas pulsation. The pressure pulsation in various cavities of mufflers are calculated and analyzed in time and frequency domain, which shows pressure pulsation in outlet cavity is decreased much more than that in inlet cavity. Experiments are also carried out to prove that the calculation models are reliable.
منابع مشابه
Noise Reduction of Rolling Piston Type Rotary Compressor
This paper refers to the noise reduction of the rolling piston type rotary compressor. In general. as the rolling piston increases its speed under the high compression ratio condition. the noise level increases steeply. We resume that this happens because a certain shock wave is produced in the comPression space. Then we could simulate the Phenomenon by the numerical analysis ( CACE method ) of...
متن کاملThe Experimental And Simulation Analysis Of The Transmission Loss Of The Muffler In The Rotary Compressor
The discharge muffler of the rotary compressor is used to reduce the discharge noise produced by pressure pulsations. In order to obtain the transmission loss of discharge muffler, four microphone experimental devices used to measure the transmission loss of the muffler is established. The device is based on the transfer function method on the assumption that there is only plane wave in the tub...
متن کاملOn Transfer Slot Design in Rotary Sliding Vane Compressors with Special Attention to Gas Pulsation Losses
متن کامل
Investigation of Laminar Pulsating Nanofluid Flow and Heat Transfer in a Rectangular Channel
In this study, two-dimensional pulsating unsteady flow of nanofluid through a rectangular channel with isothermal walls is investigated numerically. The set of resultant algebraic equations is solved simultaneously using SIMPLE algorithm to obtain the velocity and pressure distribution within the channel. The effects of several parameters, such as volume fraction of different nanoparticles, Rey...
متن کاملAssuring Reliability of Compressors Using HFC Refrigerants
In Japan, the refrigerant used in room air-conditioners has been changed from HCFC-22 (R-22) to R-410A, a blend of HFC-32 and HFC-125 (50/50 vt%), in order to protect the ozone layer. Generally, the miscibility between the refrigerant and refrigeration oil must be assured, because the oil needs to return to the compressor from the refrigeration cycle and lubricate the sliding parts. Alternative...
متن کامل