Ultradispersed Nanoarchitecture of LiV3O8 Nanoparticle/Reduced Graphene Oxide with High-Capacity and Long-Life Lithium-Ion Battery Cathodes
نویسندگان
چکیده
Lack of high-performance cathode materials has become the major barriers to lithium-ion battery applications in advanced communication equipment and electric vehicles. In this paper, we report a versatile interfacial reaction strategy, which is based on the idea of space confinement, for the synthesis of ultradispersed LiV3O8 nanoparticles (~10 nm) on graphene (denoted as LVO NPs-GNs) with an unprecedented degree of control on the separation and manipulation of the nucleation, growth, anchoring, and crystallization of nanoparticles in a water-in-oil emulsion system over free growth in solution. The prepared LVO NPs-GNs composites displayed high performance as an cathode material for lithium-ion battery, including high reversible lithium storage capacity (237 mA h g(-1) after 200 cycles), high Coulombic efficiency (about 98%), excellent cycling stability and high rate capability (as high as 176 mA h g(-1) at 0.9 A g(-1), 128 mA h g(-1) at 1.5 A g(-1), 91 mA h g(-1) at 3 A g(-1) and 59 mA h g(-1) at 6 A g(-1), respectively). Very significantly, the preparation method employed can be easily adapted and may opens the door to complex hybrid materials design and engineering with graphene for advanced energy storage.
منابع مشابه
Vanadium Oxide Nanostructures for Lithium Battery Applications
Lithium and Lithium-ion batteries for portable electronic devices and hybrid electric vehicles have gained great importance for energy storage today. However, how to prepare cathode materials with higher energy density, high potentials, and longer cycle life is still a challenge. Compared with commercial LiCoO2, vanadium oxides have higher specific capacity and interesting layered structures, w...
متن کاملIn situ synthesis of LiV3O8 nanorods on graphene as high rate-performance cathode materials for rechargeable lithium batteries.
We developed a facile two-step hydrothermal procedure to prepare hybrid materials of LiV3O8 nanorods on graphene sheets. The special structure endows them with the high-rate transportation of electrolyte ions and electrons throughout the electrode matrix, resulting in remarkable electrochemical performance when they were used as cathodes in rechargeable lithium batteries.
متن کاملA high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material
In this paper we report on a lithium ion battery (LIB) based on improved olivine lithium iron phosphate/carbon (LiFePO4/C) as cathode material and LiNa0.02K0.01FePO4/C synthesized by sol-gel method and TiO2 nanotube arrays (TNAs) with an anatase phasesynthesized through anodization of Ti foil as an anode electrode. Crystallographic structure and surface morphology of the cathode and anode mate...
متن کاملA Comparative Spectroscopic Study of Graphene - coated vs Pristine Li ( Mn , Ni , Co ) Oxide Materials for Lithium - ion Battery Cathodes
The structural properties of pristine and graphene-coated Li(Li0.2Mn0.54Ni0.13Co0.13)O2 materials were studied by the spectroscopic methods, such as Raman spectroscopy, FTIR, and synchrotron XAS. The result from Raman spectroscopy implies that the graphene coating may suppress the monoclinic phase in the pristine material and thus lead to improved stability of the cathode. The combined analyses...
متن کاملPorous CuCo2O4 nanocubes wrapped by reduced graphene oxide as high-performance lithium-ion battery anodes.
A composite of porous CuCo2O4 nanocubes well wrapped by reduced graphene oxide (rGO) sheets has been synthesized by a facile microwave-assisted solvothermal reaction and applied as anode in lithium ion batteries (LIBs). The porous structure of the CuCo2O4 nanocubes not only provides a high surface area for contact with the electrolyte, but also assists by accommodating volume change upon chargi...
متن کامل