Multi-phase alternative current machine winding design

نویسندگان

  • M. Rizwan Khan
  • Atif Iqbal
  • Moin Ahmed
  • S. Moinuddin
  • Saifullah Payami
چکیده

In this paper, a generalized formula is proposed for the selection of number of slots required for n-phase alternative current (AC) machine design and the criterion for selecting the starting points of each phases. The analytical model is verified using a four-pole machine with a 36-slot stator. Each coil of the stator winding of this machine is brought out to a patch board that enables the stator to be configured for single-phase to 18-phase excitation. Experimental results of a five-phase induction machine supplied from a static five-phase supply are provided to support the proposed design.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Performance Analysis of a Novel Three-phase Axial Flux Switching Permanent Magnet Generator with Overlapping Concentrated Winding

This paper proposes a novel axial flux switching permanent magnet generator for small wind turbine applications. Surface mounted axial flux switching permanent magnet (SMAFSPM) machine is a new type of these machines that is introduced in this paper. One of the most important challenges in optimal designing of this kind of machines, is ease of construction and maintenance. One of the main featu...

متن کامل

Speed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method

In this paper, a new method is proposed for the speed control of a three-phase current forced synchronous machine drive. This metohd is based on the use of an approximate constant commutation safety margin angle in the output thyristor bridge of the drive system as well as on the compenastion of stator magnetization reaction. The commutation process in the output converter of the machine driv...

متن کامل

Speed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method

In this paper, a new method is proposed for the speed control of a three-phase current forced synchronous machine drive. This metohd is based on the use of an approximate constant commutation safety margin angle in the output thyristor bridge of the drive system as well as on the compenastion of stator magnetization reaction. The commutation process in the output converter of the machine driv...

متن کامل

Investigation of a Novel 24-Slot/14-Pole Six-Phase Fault-Tolerant Modular Permanent-Magnet In-Wheel Motor for Electric Vehicles

In this paper, a six-phase fault-tolerant modular permanent magnet synchronous machine (PMSM) with a novel 24-slot/14-pole combination is proposed as a high-performance actuator for wheel-driving electric vehicle (EV) applications. Feasible slot/pole combinations of the fractional-slot concentrated winding six-phase PMSM are elicited and analyzed for scheme selection. The novel 24-slot/14-pole ...

متن کامل

Six Phase Permanent Magnet Machine with Fractional Slot Concentrated Winding

Permanent Magnet Machines (PMM) with a phase number (m) higher than three allow redundancy and lower torque ripple compared to their three phase counterparts. In this paper, a six phase permanent magnet machine with surface rotor magnets, designed with fractional slot tooth winding is proposed. A stator design with fractional slot tooth winding allows the design of a compact machine through sho...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011