Nanoscale Modification of Cementitious Materials
نویسنده
چکیده
This research investigates changes in the nanostructure and the nanoscale local mechanical properties of cement paste with microand nano-modifiers. Silica fume and multiwall carbon nanotubes (MWCNTs) were used as microand nano-modifiers. An effective method of dispersing CNTs in cement matrix was developed. A detailed study on the effects of CNTs concentration and aspect ratio on the fracture properties, nanoscale properties and microstructure of nanocomposite materials, was conducted. Significant improvements on the macro and nanomechanical properties of cement paste were observed with the incorporation of CNTs. Results suggest that CNTs can strongly modify and reinforce the cement paste matrix at the nanoscale.
منابع مشابه
Nanomechanical Properties of Cementitious Materials
Nanomechanical Properties of Cementitious Materials Paramita Mondal Although cementitious construction materials are mainly used in a large scale and in huge quantities, fundamental properties such as strength, ductility, creep, shrinkage, and fracture behavior depend, to a great extent, on structural elements and phenomena which are effective at the microand nanoscale. This research involves c...
متن کاملHuge opportunities for industry of nanofibrous concrete technology
In spite of the fact that cementitious and concrete materials are mainly used on a large scale and in huge quantities for roads, dams, bridges and building constructions, the mechanical behavior of these materials depends to a great extend on structural elements and phenomena which are effective on a micro and nanoscale. Although this is well known by researchers, material producers and enginee...
متن کاملMango Seed Fibers Surface Chemical Modification Applied as Mechanical Reinforcement in Cementitious Composites
Cementitious composite is one of the most widely used construction materials in the world because its abundant resources, strong adaptability and mature production process [1]. Despite cementitious matrices present good compression strength, they are brittle and usually break when suffer some strain caused by tensile effort. Aiming to overpass this problem some fibers can be used as reinforceme...
متن کاملUsing Different Methods of Nanofabrication as a New Way to Activate Supplementary Cementitious Materials; a Review
Reducing the consumption of cement with simultaneous utilizing waste materials as cement replacement is preferred for reasons of environmental protection. Blended cements consist of different supplementary cementitious materials (SCMs), such as fly ash, silica fume, Ground Granulated Blast Furnace Slag (GGBFS), natural pozzolans, etc. These materials should be chemically activated to show effec...
متن کاملDesigning Repeatable Self-Healing into Cementitious Materials
Designing self-healing into cementitious materials can open a new world of opportunities for resilient concrete infrastructure under service loading conditions. The self-healing process should be robust as well as repeatable, allowing for self-repair after multiple damage events. The repeatability poses great challenges when self-healing strategies mainly rely on the formation of low-strength c...
متن کامل