1 IT / P 6 - 19 Pellet Fueling , ELM pacing , and Disruption Mitigation Technology Development for ITER ∗
نویسندگان
چکیده
Plasma fueling with pellet injection, pacing of edge localized modes (ELMs) by small frequent pellets, and disruption mitigation with gas jets or injected pellets are some of the most important technological capabilities needed for successful operation of ITER. Tools are being developed at Oak Ridge National Laboratory that can be employed on ITER to provide the necessary core pellet fueling and the mitigation of ELMs and disruptions. Here we present progress on the development of the technology to provide reliable high throughput inner wall pellet fueling, pellet ELM pacing with high frequency small pellets, and disruption mitigation with gas jets and pellets. Examples of how these tools can be employed on ITER are discussed.
منابع مشابه
1 ITR / P 1 - 27 Shattered Pellet Disruption Mitigation Technology Development for ITER
The mitigation of first wall thermal and mechanical loads and damage from runaway electrons during disruptions are critical for successful long term operation of ITER. Disruption mitigation tools based on shattered pellet injection are being developed at Oak Ridge National Laboratory that can be employed on ITER to provide the necessary mitigation of thermal and mechanical loads from disruption...
متن کامل1 TH / P 4 - 5 Mitigation of ELMs and Disruptions by Pellet Injection
Deuterium, impurity and impurity doped pellets are studied in light of their use for ELM and disruption mitigation. Based on ELM pace making studies at ASDEX Upgrade and JET, the minimum pellet size required to cause an ELM, has been estimated in ITER for the foreseen pellet velocities. Concerning disruption mitigation studies the number of runaways is determined for JET like plasmas for deuter...
متن کاملELM physics and ELM mitigation in ITER
Edge Localised Modes are characteristic of the high performance, H-mode plasmas that are required for the attainment of Q = 10/500MW fusion power in the first phase of ITER operation. The energy released by a type I ELM, in good confinement plasmas, is typically 510% of the plasma stored energy; with low collisionality plasmas at the upper end of the range. Dimensional analysis, experiment and ...
متن کاملTPOP-II: Tritium Fueling at a Reactor Scale
As part of the International Thermonuclear Experimental Reactor (ITER) plasma fueling development program, Oak Ridge National Laboratory (ORNL) has fabri injection system to test the mechanical and thermal properties of extruded tritium repeating single-stage pneumatic pellet injector, called the Tritium-Proof-of-Principle Phase II (TPOP-II) Pellet Injector, has a piston-driven mechanical extru...
متن کاملAlternate Concepts for Generating High Speed DT Pellets for Fueling ITER
There is a growing concern that the velocity of the DT-ice pellets being proposed to fuel ITER will not have the velocity to effectively penetrate through the pedestal of the plasma edge, because with velocities of only 300 m/s, high field side launched pellets will only penetrate to € r /a = 0.90, which may not be adequate for fueling. The likelihood of increasing the pellet velocity is proble...
متن کامل