Mechanical Analysis of Stress Distribution in a Carbon Fiber-Reinforced Polymer Rod Bonding Anchor
نویسندگان
چکیده
This paper presents an elastic shear stress distribution theoretical model at the carbon fiber-reinforced polymer (CFRP)-adhesive interface of a single-rod and a multi-rod straight-pipe bonding anchor. A comparison between theoretical and finite element analysis results reveals that the accuracy of the theory can be used to guide the preliminary design of CFRP rod bonding anchors. The mechanical performance of the inner cone bonding anchor for multi-rods are evaluated within different coefficients of friction and inner inclined angles. Numerical results indicate that the straight-parabolic inner cone bonding anchor has a significant effect on reducing the shear force at the loading end.
منابع مشابه
Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers
In this study, the distribution of residual stress in fiber-reinforced nanocomposites is investigated. Fiber-reinforced nanocomposite is composed of three substances: carbon fiber, carbon nanotube (CNT), and polymer matrix. Unit cells in hexagonal packing array with different arrays as unit cell, 3*3 and 5*5 arrays have been selected as suitable for finite element analysis of residual stresses....
متن کاملApplication of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates.
In the present study, modelling and vibration analysis of Carbon nanotubes/ fiber/ polymer composite microplates are investigated. The governing equations of the Carbon nanotubes/ fiber/ polymer composite microplates are derived based on first order shear deformation plate theory, rather than other plate theories, due to accuracy and simplicity of polynomial functions. The modified couple stres...
متن کاملFinite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites ...
متن کاملEvaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کاملMechanical material characterization of an embedded Carbon nanotube in polymer matrix by employing an equivalent fiber
Effective elastic properties for carbon nanotube reinforced composites are obtained through a variety of micromechanics techniques. An embedded carbon nanotube in a polymer matrix and its surrounding interphase is replaced with an equivalent fiber for predicting the mechanical properties of the carbon nanotube/polymer composite. The effects of an interphase layer between the nan...
متن کامل