Improving the Performance of Phosphorescent Based White Polymer Light Emitting Devices Using Iridium Complexes
نویسندگان
چکیده
Polymer White-light-emitting devices WPLEDs with single layer structures are fabricated by the spincoating method. The device structure used here is indium-tin-oxide(ITO)/polyethylene dioxythiophene(PEDOT:PSS)/polymer blend/Ca/Al, whose blend consists poly N-vinylcarbazole(PVK) hole transporting host polymer, an electron transporting materials 2-4-biphenylyl-5-tert-butylphenyl1,3,4-oxadiazole(PBD), doped with blue emitting and orange light emitting Ir complexes. The white light emission with CIE coordinates of (0.33, 0.36) is achieved in a large voltage range, the maximal luminance efficiency of 1.8 cd/A is obtained at 6V, and the maximal brightness is 3000 cd/m2 at 9 V.
منابع مشابه
High-efficiency organic polymer light-emitting heterostructure devices on flexible plastic substrates
Articles you may be interested in High-contrast organic light-emitting diodes on flexible substrates Appl. High-performance polymer light-emitting diodes doped with a red phosphorescent iridium complex Appl. High-efficiency, low-drive-voltage, semitransparent stacked organic light-emitting device Appl.
متن کاملNovel Design of Iridium Phosphors with Pyridinylphosphinate Ligands for High-Efficiency Blue Organic Light-emitting Diodes
Due to the high quantum efficiency and wide scope of emission colors, iridium (Ir) (III) complexes have been widely applied as guest materials for OLEDs (organic light-emitting diodes). Contrary to well-developed Ir(III)-based red and green phosphorescent complexes, the efficient blue emitters are rare reported. Like the development of the LED, the absence of efficient and stable blue materials...
متن کاملRed-light-emitting electrochemical cell using a polypyridyl iridium(III) polymer.
A deep-red phosphorescent ionic iridium(III) complex is prepared and incorporated into a polymer. Both the complex (1) and the polymer (2) were used as the single active material in solid-state light-emitting electrochemical cells (LECs). The devices built up using 1 and 2 emit in the deep-red region of the visible spectrum with CIE coordinates x = 0.710; y = 0.283 and x = 0.691; y = 0.289, res...
متن کاملEfficient non-doped phosphorescent orange, blue and white organic light-emitting devices
Efficient phosphorescent orange, blue and white organic light-emitting devices (OLEDs) with non-doped emissive layers were successfully fabricated. Conventional blue phosphorescent emitters bis [4,6-di-fluorophenyl]-pyridinato-N,C(2')] picolinate (Firpic) and Bis(2,4-difluorophenylpyridinato) (Fir6) were adopted to fabricate non-doped blue OLEDs, which exhibited maximum current efficiency of 7....
متن کاملPhosphorescent Organic Light-Emitting Devices: Working Principle and Iridium Based Emitter Materials
Even though organic light-emitting device (OLED) technology has evolved to a point where it is now an important competitor to liquid crystal displays (LCDs), further scientific efforts devoted to the design, engineering and fabrication of OLEDs are required for complete commercialization of this technology. Along these lines, the present work reviews the essentials of OLED technology putting sp...
متن کامل