Deep Drawing Simulation of Tailored Blanks
نویسندگان
چکیده
†Hoogovens Research and Development, Product Application Centre, P.O. Box 10000, 1970 CA IJmuiden, The Netherlands, e-mail: [email protected] *University of Twente, Faculty of Mechanical Engineering, P.O. Box 217, 7500 AE Enschede, The Netherlands, e-mail: [email protected] Automotive Tailored Blanks, P.O. Box 505, 3750 GM Bunschoten, The Netherlands, e-mail: [email protected]
منابع مشابه
Abrasive Wear between Rough Surfaces in Deep Drawing
A recent development in sheet metal forming industry is the application of tailored blanks: blanks prepared from separate pieces of sheet material, welded together prior to the forming process. The pieces of sheet material can have different properties, enabling weight reduction of components, corrosion resistance using cathodic protection or the possibility to create local weak spots, resultin...
متن کاملDeep Drawing of High-Strength Tailored Blanks by Using Tailored Tools
In most forming processes based on tailored blanks, the tool material remains the same as that of sheet metal blanks without tailored properties. A novel concept of lightweight construction for deep drawing tools is presented in this work to improve the forming behavior of tailored blanks. The investigations presented here deal with the forming of tailored blanks of dissimilar strengths using t...
متن کاملNumerical and Experimental Research of Deep Drawing Process
There are mainly two methods of deep drawing analysis; experimental and analytical/numerical. Experimental analysis can be useful in analyzing the process to determine the process parameters that produce a defect free product, and the analytical/numerical modeling can be used to model and analyze the process through all stages of deformation. This approach is less time consuming and more econom...
متن کاملEffect of Strain Induced Martensite on the Deep Drawing Behavior of 304L Steel: Simulation and Experiment
Abstract In the present research, the behavior of 304L austenitic stainless steel in the deep drawing process has been studied at the room temperature through experimental and finite element simulation method. Magnetic method calibrated by XRD was used to measure induced-martensite. Martensite volume fraction in the various portion of the deep drawn cup under optimum Blank Holder Force (BHF) a...
متن کاملExperimental and Numerical Study of Preform Design in Multi Stage Deep Drawing of High Strength Thin Steel Sheet
In this paper, experimental results of a deep drawing process to produce a cylinder of high strength steel with a spherical head were compared with it’s simulation results and three proposal design types. Meanwhile, the amount of limiting draw ratio in some stages was determined. Accuracy and precision of the results of a finite element software to predicting the multi stage deep drawing proces...
متن کامل