Comparison of stress zones in finite element models of deformed bovine claw capsules.
نویسندگان
چکیده
Pathological claw formations occur subsequent to irregular or prolonged claw trimming periods and as a result of improper flooring. Clinical experience and material testing finds horn of minor quality to be associated with the malformations. Finite element models (FEM) of a flat claw (FC), a contracted claw (CC), and a laminitic claw (LC) were designed from native claw specimens to combine material properties and altered claw geometry for stress analysis. The FEM were created by digitizing the typically deformed exungulated claw capsule by means of computed tomography or digital photography. The derived geometry data were meshed with finite elements and the material properties were attributed. Loading was performed via vertical load vectors according to the suspensory and support apparatus of the bovine digit. All FEM were loaded on soft floors. Loading of the FEM of the FC with 756 N exhibited maximum stress values of 3.32 MPa in the dorsal wall, that of the CC exhibited comparably lower stress of 1.33 MPa in the distal abaxial wall, and the model of the LC showed maximum stress of 4.51 MPa in the region of the dorsal border, all at the same loading. The solar surfaces and the corresponding imprints showed stress concentrations in the palmar aspect of the bulb in the FC, a highly stressed bearing margin of the abaxial wall in the CC, and a diffusely stressed sole and bulb in the LC in contrast to the sound claw models. The FEM of the selected pathological claw forms (FC, CC, LC) calculated high stress zones exactly at locations in the claw wall and sole where clinical experts expect the typical claw lesions for these pathologies. These results were obtained simply by exchanging the outer form of the claw capsules; the method of loading and type of flooring for these pathological models were equivalent to those of the sound FEM. It is highly possible that the stress zones derived from these calculations represent corium compression in reality, and these data support the pathophysiological theory that claw lesions may arise as a consequence thereof.
منابع مشابه
FINITE ELEMENT PREDICTION OF DUCTILE FRACTURE IN AUTOMOTIVE PANEL FORMING: COMPARISON BETWEEN FLD AND LEMAITRE DAMAGE MODELS
In sheet metal forming processes with complex strain paths, a part is subjected to large plastic deformation. This severe plastic deformation leads to high plastic strain localization zones and subsequent accumulation of those strains. Then internal and superficial micro-defects and in other words ductile damage is created. This damage causes quality problems such as fracture. Therefore, design...
متن کاملModeling of Tactile Detection of an Artery in a Soft Tissue by Finite Element Analysis
Nowadays, one of the main problems encountered in minimally invasive surgery and telesurgery is the detection of arteries in tissue. In this study, for the first time, tactile detection of an artery in tissue and distinguishing it from the tumor has been modeled by finite element method. In this modeling, three 2D models of tissue have been created: tissue, tissue including a tumor, and tissue ...
متن کاملA comparison between numerical and analytical modeling of ECAP
Recent developments in nanostructured products draw considerable attention to ultrafine grained materials. These materials are normally manufactured by different severe plastic deformation (SPD) methods. In the present study, analytical models and finite element method (FEM) are used to calculate strain imposed to a specimen that was deformed by equal channel angular pressing (ECAP). In additio...
متن کاملFinite Element Analysis of the Effect of Proximal Contour of Class II Composite Restorations on Stress Distribution
Introduction: The aim of this study was to evaluate the effect of proximal contour of class II composite restorations placed with straight or contoured matrix band using composite resins with different modulus of elasticity on stress distribution by finite element method. Methods: In order to evaluate the stress distribution of class II composite restorations using finite element method, upper ...
متن کاملEvaluation of different materials used for post construction and stress distribution in the radicular dentin using finite element method
Evaluation of different materials used for post construction and stress distribution in the radicular dentin using finite element method Dr. S. Nokar *- Dr. AS. Mostafavi ** *Assistant Professor of Prosthodontics Dept., Faculty of Dentistry, Tehran University / Medical Sciences. **Resident of Prosthodontics Dept., Faculty of Dentistry, Tehran University / Medical Sciences. Abstract Background a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of dairy science
دوره 90 8 شماره
صفحات -
تاریخ انتشار 2007