Maximum allowable exposure to different heat radiation levels in three types of heat protective clothing
نویسندگان
چکیده
To determine safe working conditions in emergency situations at petro-chemical plants in the Netherlands a study was performed on three protective clothing combinations (operator's, firefighter's and aluminized). The clothing was evaluated at four different heat radiation levels (3.0, 4.6, 6.3 and 10.0 k∙W∙m-2) in standing and walking posture with a thermal manikin RadMan™. Time till pain threshold (43°C) is set as a cut-off criterion for regular activities. Operator's clothing did not fulfil requirements to serve as protective clothing for necessary activities at heat radiation levels above 1.5 k∙W∙m-2 as was stated earlier by Den Hartog and Heus1). With firefighter's clothing it was possible to work almost three min up to 4.6 k∙W∙m-2. At higher heat radiation levels firefighter's clothing gave insufficient protection and aluminized clothing should be used. Maximum working times in aluminized clothing at 6.3 k∙W∙m-2 was about five min. At levels of 10.0 k∙W∙m-2 (emergency conditions) emergency responders should move immediately to lower heat radiation levels.
منابع مشابه
Heat gain from thermal radiation through protective clothing with different insulation, reflectivity and vapour permeability.
The heat transferred through protective clothing under long wave radiation compared to a reference condition without radiant stress was determined in thermal manikin experiments. The influence of clothing insulation and reflectivity, and the interaction with wind and wet underclothing were considered. Garments with different outer materials and colours and additionally an aluminised reflective ...
متن کاملQuantitative assessment of the relationship between radiant heat exposure and protective performance of multilayer thermal protective clothing during dry and wet conditions.
The beneficial effect of clothing on a person is important to the criteria for people exposure to radiant heat flux from fires. The thermal protective performance of multilayer thermal protective clothing exposed to low heat fluxes during dry and wet conditions was studied using two designed bench-scale test apparatus. The protective clothing with four fabric layers (outer shell, moisture barri...
متن کاملA Study on Total Heat Loss of Clothing Materials for Firefighters’ Protective Clothing
Clothing is often made of materials that impede the flow of heat and moisture from the skin to the environment. Consequently, people may suffer from heat stress or cold stress when wearing clothing in different environmental conditions. Therefore it is important to quantify the thermal resistance and evaporative resistance of clothing materials and to consider these properties when selecting ma...
متن کاملPerformance of firefighters' protective clothing after heat exposure.
Heat and mechanical protection properties of 6 fabric combinations commonly used in firefighters' protective clothing were assessed before and after different heat treatment. It was shown that after heat exposure, the values obtained were generally lower than in the original state. The mechanical properties of the materials were more affected by heat than by heat protective properties. In 2 cas...
متن کاملThermal Strains Wearing Aluminized Firefighters’ Clothing
This study examined the influences of aluminized (Type A) and non-aluminized firefighters’ protective clothing (Type B, C, D and CON) on physiological and subjective responses in radiant heat. Total clothing weight was 6.24, 6.38, 6.06, 5.76 and 3.82 kg for Type A, B, C, D and CON, respectively. Eight firefighters performed exercise at an air temperature of 30°C with 50%RH. Three bouts of 10 mi...
متن کامل