Analysis of the Contact Area of Smooth and Rough Surfaces in Contact with Sphere Indenter Using Finite Element Method
نویسندگان
چکیده
This paper analyzes the contact area of the contact between a deformable rough surface (smooth and rough) and a hard smooth sphere indenter using finite element method. A method was introduced to generate a three dimensional rough surfaces using Computer Aided Design (CAD) software. The rough surface model was developed based on the surface measurement data, while the smooth surface model was generated from the CAD software. Contact area and contact deformation were analyzed. Results showed that the contact area between rough surface versus sphere and smooth surface versus sphere is different.
منابع مشابه
Finite Element Simulation of Contact Mechanics of Cancer Cells in Manipulation Based on Atomic Force Microscopy
The theory of contact mechanics deals with stresses and deformations which arise when the surfaces of two solid bodies are brought into contact. In elastic deformation contact occurs over a finite area. A regular method for determining the dimensions of this area is Hertz Contact Model. Appearance of atomic force microscope results in introduction of Contact ...
متن کاملNonlinear Finite Element Eccentric Low-Velocity Impact Analysis of Rectangular Laminated Composite Plates Subjected to In-phase/Anti-phase Biaxial Preloads
All impact analyses performed so far for the composite plates, have treated central impacts. Furthermore, investigations on influences of the in-plane biaxial compression, tension, or tension-compression preloads on various responses of the low-velocity impact, especially the indentation, have not been performed so far. In the present research, a finite element formulation is presented for resp...
متن کاملExperimental Investigation and Numerical Simulation on the Role of Sphere Indenter in Measuring Contact Resistance of Flat Rivets
There has been increasing demand to research the measuring method to characterize the batch consistency of contact rivets. An automated test equipment has been described that makes it possible to measure the electrical contact resistance with high efficiency. The relationship between contact force and contact resistance during the loading and unloading process was measured explicitly using AgPd...
متن کاملA Finite Element Based Elastic-Plastic Model for the Contact of Rough Surfaces
An elastic-plastic model for contacting rough surfaces that is based on accurate Finite Element Analysis (FEA) of an elasticplastic single asperity contact is presented. The plasticity index Ψ is shown to be the main dimensionless parameter that affects the contact of rough surfaces. Below Ψ = 0.6 the contact problem is purely elastic and above Ψ = 8 it is mostly plastic. The mean real contact ...
متن کاملتحلیل پایداری ایمپلنت دندانی و بررسی تاثیر عوامل موثر بر اتصال ایمپلنت- استخوان به کمک مدل اصطکاکی تماس
Background and Aims: Relative displacement of the implant with respect to bone and quality of bone-implant contact play critical roles in the dental implant stability. The goal of this study was to investigate the dental implant stability using non-linear finite elements method. Therefore, bone-implant relative displacement due to applied force to the implant was calculated, and then an appropr...
متن کامل