Properties of dual-cure, bulk-fill composite resin restorative materials.
نویسندگان
چکیده
The purpose of this study was to compare the properties of 2 new dual-cure, bulk-fill restorative composite resins to those of a hybrid composite resin material. Depth of cure, fracture toughness, porosity, microleakage, and volumetric shrinkage properties were examined. With the exception of fracture toughness, significant differences were found among materials. Compared to the incrementally placed hybrid composite, the dual-cure, bulk-fill restorative composites in self-cured mode had unlimited depth of cure, similar fracture toughness and porosity formation, and greater polymerization shrinkage and microleakage.
منابع مشابه
Relative Microhardness and Flexural Strength of Different Bulk Fill Resin Composite Restorative Materials
Aim: to find out if there is a significant difference in the curing efficiency at the claimed 4 mm depth and in the mechanical properties between the tested pasteform bulk fill resin composite materials. Materials and Methods: Three paste-consistency bulk-fill resin composites were used in this study (Filtek bulk fill3M; X-trafilVoco; and SonicFill bulk-fillKerr). For the microhardness testing,...
متن کاملBulk Fill Composite Resins . A Novelty in Resin - Based Restorative Materials
Composites resins are the most popular restorative materials providing very good esthetics and long period of good clinical performance. Depth of cure of composite resins is crucial in determining the maximal increment thickness when restoring tooth cavities. In restorations with conventional composite resins the thickness of each increment has been defined as up to 2 mm. Bulk fill composite re...
متن کاملDiametral Tensile Strength, Flexural Strength, and Surface Microhardness of Bioactive Bulk Fill Restorative.
AIM The aim was to perform comparative analysis of bioactive, contemporary bulk-fill resin-based composites (RBCs) and conventional glass-ionomer materials for flexural strength (FS), diametral tensile strength (DTS), and Vickers hardness number (VHN) in the presence of thermocycling. MATERIALS AND METHODS Five restorative materials [Tetric N-Ceram Bulk Fill; smart dentin replacement (SDR) Fl...
متن کاملبررسی تأثیر استفاده از لاینرهای کامپوزیت قابل جریان و کامپوزیت با سخت شدگی دوگانه بر روی ریزنشت لثهای ترمیمهای کامپوزیتی خلفی
Background and Aim: Microleakage has been always a major concern in restorative dentistry. The curing contraction of composites still presents a problem with controlling microleakage and postoperative sensitivity. The aim of this study was to investigate the effect of flowable and dual-cure resin composite liners on gingival microleakage of packable resin composite restorations. Materials and ...
متن کاملThe effect of different insertion techniques on the depth of cure and vickers surface micro-hardness of two bulk-fill resin composite materials
BACKGROUND The aim of this study was to evaluate the Vickers surface micro-hardness and the depth of cure of two bulk-fill resin composites and one incremental-fill resin composite. MATERIAL AND METHODS Two Bulk-fill dental resin composites (X-tra Fil, Voco; Sonic-FillTM 2, Kerr Corporation) and an incremental-fill dental resin composite (Filtek™ Z250 XT, 3M ESPE) were used. Sixty cylindrical...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- General dentistry
دوره 64 2 شماره
صفحات -
تاریخ انتشار 2016