An Improved Recycling Folded Cascode OTA with positive feedback

نویسندگان

  • S. KUMARAVEL
  • B. VENKATARAMANI
چکیده

In the literature, Improved Recycling Folded Cascode (IRFC) Operational Transconductance Amplifier (OTA) is proposed for enhancing the DC gain and the Unity Gain Bandwidth (UGB) of the Recycling Folded Cascode (RFC) OTA. In this paper, an enhanced IRFC (EIRFC) OTA which uses positive feedback at the cascode node is proposed for enhancing the differential mode (DM) gain without changing the unity gain bandwidth (UGB), and lowering the Common mode (CM) gain. For the purpose of comparison, IRFC and EIRFC OTAs are implemented using UMC 90 nm CMOS technology and studied through simulation. From the simulation, it is found that the DM gain and CM gain of EIRFC OTA is higher by 6dB and lower by 39 dB respectively, compared to that of IRFC OTA for the same power and area. The slew rate of EIRFC OTA is also higher by a factor of 1.5. Key-Words: Cascode Amplifier, CMRR, gm/ID Methodology, Recycling, Slew Rate, Common-mode

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Current Steering Positive Feedback Improved Recycling Folded Cascode OTA

In the literature, Improved Recycling Folded Cascode (IRFC) Operational Transconductance Amplifier (OTA) is proposed for enhancing the DC gain and the Unity Gain Bandwidth (UGB) of the Recycling Folded Cascode (RFC) OTA. In this paper, an enhanced IRFC (EIRFC) OTA which uses positive feedback at the cascode node is proposed for enhancing the differential mode (DM) gain without changing the unit...

متن کامل

Design and Analysis of Gain Boosted Recycling Folded Cascode OTA

In this paper, a low Power, Gain Boosted Recycling Folded Cascode Operational Transconductance Amplifier (GB-RFC OTA) is described. The proposed GB-RFC OTA is designed using 130nm CMOS technology and achieves enhanced gain, unity gain bandwidth and slew rate with the low Power budget. The proposed circuit operates on 1V supply voltage and 200 μA bias current and consumes a power of 798μW.The GB...

متن کامل

Low Power Fully Differential Folded Cascode OTA with CMFB Circuit

This paper presents the designing of a fully differential folded cascode operational transconductance amplifier (OTA) with common mode feedback circuit (CMFB). The designed OTA is operated in sub-threshold region to reduce the power consumption. The simulation is carried out in CADENCE environment using 150nm CMOS. The simulation result shows the DC gain of 82 dB with UGBW of 768 KHz, CMRR of 1...

متن کامل

Improved PSRR and Output Voltage Swing Characteristics of Folded Cascode OTA

Mixed and analog systems design with high performance suffers from many difficulties due to supply voltage, power consumption and area overhead. A need for low-voltage low-power operational amplifiers exists and used for some applications. This paper deals an effective OTA design for good PSRR, low-voltage, low-power and wide output voltage swing operational amplifier. Trying to combine an alte...

متن کامل

Design and Analysis of CMOS Folded Cascode OTA Using Gm/ID Technique

AbstractThis paper deals with the design and analysis of folded cascode operational transconductance amplifier in different regions of operations: strong, weak and moderate inversion region. The folded cascode OTA consists of cascode OTA and cascode gain boosting technique. By using 0.35μm technology, the simulation shows DC gain of 78.42dB with a unity gain bandwidth of 446.07 MHz and power co...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014