HIGH SENSITIVE ABSOLUTE MEMS CAPACITIVE PRESSURE SENSOR IN SiGeMEMS PROCESS FOR BIOMEDICAL APPLICATIONS
نویسنده
چکیده
A high sensitive CMOS Micro-electro-mechanical rectangular capacitive pressure sensor in SiGeMEMS process (Silicon Germanium Micro-electro-mechanical System process) is designed and analyzed. Polycrystalline Silicon Germanium (Poly-SiGe) having low fatigue and high strength is effectively used as the sensor diaphragm material to achieve better reliability. The designed perforated diaphragm clamped only at the short sides, yielded high sensitivity, large dynamic range and better linearity. On-chip signal processing circuit in 0.18 μm TSMC CMOS technology is designed to achieve a high single stage gain of 86 dB. A higher sensitivity of 8.72 mV/V/hPa, with a non linearity of less than 1% for the full scale range of applied pressure load is achieved. The diaphragm having a wider dynamic range of 2 hPa – 500 hPa has increased low pressure capability for pulmonary wedge pressure measurement. With the underlying design of CMOS circuitry the micro-system has a reduced chip area for implantable device application.
منابع مشابه
Design of Novel High Sensitive MEMS Capacitive Fingerprint Sensor
In this paper a new design of MEMS capacitive fingerprint sensors is presented. The capacitive sensor is made of two parallel plates with air gap. In these sensors, the capacitance changes is very important factor. It is caused by deformation of the upper electrode of sensor. In this study with making slots in upper electrode, using T-shaped protrusion on diaphragm in order to concentrate the f...
متن کاملDesign of High Sensitivity and Linearity Microelectromechanical Systems Capacitive Tire Pressure Sensor using Stepped Membrane
This paper is focused on a novel design of stepped diaphragm for MEMS capacitive pressure sensor used in tire pressure monitoring system. The structure of sensor diaphragm plays a key role for determining the sensitivity of the sensor and the non-linearity of the output.First the structures of two capacitive pressure sensors with clamped square flatdiaphragms, with different thicknesses are inv...
متن کاملModeling of capacitance and sensitivity of a MEMS pressure sensor
In this paper modeling of capacitance and sensitivity for MEMS capacitive pressure sensor is presented. In capacitive sensor the sensitivity is proportional to deflection and capacitance changes versus pressure. Therefore first the diaphragm displacement, capacitance and sensitivity of sensor with square diaphragm have been modeled and then simulated using finite element method (FEM). It can b...
متن کاملSimulation and Modeling of a High Sensitivity Micro-electro-mechanical Systems Capacitive Pressure Sensor with Small Size and Clamped Square Diaphragm
This paper proposes a Micro-electro-mechanical (MEMS) capacitive pressure sensor that relies on the movable electrode displaced like a flat plate equal to the maximum center deflection of diaphragm. The diaphragm, movable electrode and mechanical coupling are made of polysilicon, gold and Si3N4, respectively. The fixed electrode is gold and the substrate is Pyrex glass. This proposed method inc...
متن کاملA Study of Silicon based MEMS Capacitive Sensor for Absolute Pressure Measurement of a Specific Range
In this paper two MEMS capacitive pressure sensor of two diffident geometries are designed for measurement of absolute pressure. Both of these sensors are designed as parallel plates where one is movable and the other is fixed. The only difference with common parallel plate structure is that one of the movable plates is supported by four anchors with respect to the fixed plate. Here we have con...
متن کامل