Piezoelectricity in ?-phase PVDF crystals: A molecular simulation study

نویسندگان

  • GuoDong Zhu
  • ZhiGang Zeng
  • Li Zhang
  • XueJian Yan
چکیده

Based on the energy-minimization method in molecular simulation, the origin of piezoelectricity in b-phase PVDF crystals was investigated. Simulation results indicated that under the action of a constant applied voltage, PVDF crystal would be stretched or compressed, dependent on the orientation of dipoles and the polarity of the applied voltage. Our simulation confirmed that piezoelectricity in polymers would be mostly attributed to the dimensional effect. Piezoelectric coefficient calculated from our model was well consistent with experimental data, which showed the credibility of this model. 2008 Elsevier B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Orientation of PVDF α and γ crystals in nanolayered films

Wide-angle X-ray scattering in conjunction with pole figure technique was used to study the texture of poly(vinylidene fluoride) (PVDF) α and γ phase crystals in nanolayered polysulfone/poly(vinylidene fluoride) films (PSF/PVDF) produced by layer-multiplying coextrusion. In all as-extruded PSF/PVDF films, the PVDF nanolayers crystallized into the α phase crystals. A large fraction of those crys...

متن کامل

Density functional theory and molecular dynamics studies of the energetics and kinetics of electroactive polymers: PVDF and P(VDF-TrFE)

We used first principles methods to study static and dynamical mechanical properties of the ferroelectric polymer poly(vinylidene fluoride) (PVDF) and its copolymer with trifluoro ethylene (TrFE). We use density functional theory [within the generalized gradient approximation (DFT-GGA)] to calculate structure and energetics for various crystalline phases for PVDF and P(VDF-TrFE). We find that t...

متن کامل

Numerical Simulation of Output Response of PVDF Sensor Attached on a Cantilever Beam Subjected to Impact Loading

Polyvinylidene Flouride (PVDF) is a film-type polymer that has been used as sensors and actuators in various applications due to its mechanical toughness, flexibility, and low density. A PVDF sensor typically covers an area of the host structure over which mechanical stress/strain is averaged and converted to electrical energy. This study investigates the fundamental "stress-averaging" mechanis...

متن کامل

PVDF microbelts for harvesting energy from respiration†

In this paper, we report a technique that uses piezoelectric polyvinylidene fluoride (PVDF) microbelts to convert the energy from low-speed air flow to electricity via their resonant oscillation. The micrometre thick PVDF thin films were fabricated by a top-down reactive ion etching process, where the thickness was controlled by etching time and the piezoelectric phase was well preserved. The t...

متن کامل

Atomistic Modelling of Processes Involved in Poling of Pvdf

Marta M. D. Ramos, Helena M. G. Correia, S. Lanceros-Méndez Departamento de Física, Universidade do Minho, Campus de Gualtar, 4710-057 Braga, Portugal Abstract Poling processes play an important role in the design and preparation of many ferroelectric materials for practical uses in the field of sensors and actuators. Particularly, the processing of piezoelectric β-poly(vinylidene fluoride) (β-...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015