[Article] From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering
نویسندگان
چکیده
In this paper, a characterization of an AlSiMg alloy processed by direct metal laser sintering (DMLS) is presented, from the analysis of the starting powders, in terms of size, morphology and chemical composition, through to the evaluation of mechanical and microstructural properties of specimens built along different orientations parallel and perpendicular to the powder deposition plane. With respect to a similar aluminum alloy as-fabricated, a higher yield strength of about 40% due to the very fine microstructure, closely related to the mechanisms involved in this additive process is observed.
منابع مشابه
From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering
In this paper, a characterization of an AlSiMg alloy processed by direct metal laser sintering (DMLS) is presented, from the analysis of the starting powders, in terms of size, morphology and chemical composition, through to the evaluation of mechanical and microstructural properties of specimens built along different orientations parallel and perpendicular to the powder deposition plane. With ...
متن کاملMicrostructure and Mechanical Properties of Direct Metal Laser Sintered Ti- 6al-4v
Direct metal laser sintering (DMLS) is a selective laser melting (SLM) manufacturing process that can produce near net shape parts from metallic powders. A range of materials are suitable for SLM; they include various metals such as titanium, steel, aluminium, and cobalt-chrome alloys. This paper forms part of a research drive that aims to evaluate the material performance of the SLM-manufactur...
متن کاملPractical Issues in the Application of Direct Metal Laser Sintering
Direct Metal Laser Sintering (DMLS) was introduced to meet the objective of producing metal parts directly from CAD data. CRDM has accumulated six years of experience in applying this technique, mostly to prototyping parts for evaluation. For some applications, such as blow moulds, porosity generated in DMLS has proved to be beneficial, but for others a concession on tolerances or finish are ne...
متن کاملCharacterization of Metal Powders Used for Additive Manufacturing
Additive manufacturing (AM) techniques can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for p...
متن کاملSintering Mechanisms and Mechanical Properties of 3D Printed Metals
Nickel and iron based alloys are widely used as raw materials in 3D printing or additive manufacturing process. In direct metal laser sintering (DMLS) process, a primary 3D printing technique for metals, metallic powders are sintered to a desired shape by heat energy from a laser beam. This study presents a molecular dynamics study to simulate the sintering process and resultant mechanical prop...
متن کامل