Effect of Interfacial Bonds on the Morphology of InAs QDs Grown on GaAs (311) B and (100) Substrates

نویسندگان

  • Lu Wang
  • Meicheng Li
  • Min Xiong
  • Liancheng Zhao
چکیده

The morphology and transition thickness (t(c)) for InAs quantum dots (QDs) grown on GaAs (311) B and (100) substrates were investigated. The morphology varies with the composition of buffer layer and substrate orientation. And t(c) decreased when the thin InGaAs was used as a buffer layer instead of the GaAs layer on (311) B substrates. For InAs/(In)GaAs QDs grown on high miller index surfaces, both the morphology and t(c) can be influenced by the interfacial bonds configuration. This indicates that buffer layer design with appropriate interfacial bonds provides an approach to adjust the morphologies of QDs grown on high miller surfaces.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Comparative study on InAs/InGaAs dots-in-a-well structure grown on GaAs(311) B and (100) substrates.

The InAs/InGaAs dots-in-a-well (DWELL) structures were grown on both GaAs(311) B and (100) substrates by molecular beam epitaxy. Quantum dots (QDs) grown on GaAs(311) B substrate are of higher density and more uniform size distribution, yet QDs grown on GaAs(100) substrate demonstrate a bimodal size distribution. The growth mechanism of these surface morphologies was briefly discussed. We found...

متن کامل

Characteristic of P-type AlAs/GaAs Bragg Mirrors Grown by MBE on (100) and (311)A Oriented Substrates

P-type GaAs/AlAs distributed Bragg mirrors have been grown using molecular beam epitaxy on (100) and (311)A GaAs substrates in a similar conditions. A comparison of I-V measurements shows that the resistance of the ungraded mirrors grown on the (311)A substrate is 35 times lower than those grown on the (100) substrate with similar structure. The effective barrier heights for both (311 )A and (1...

متن کامل

InSb quantum dots for the mid-infrared spectral range grown on GaAs substrates using metamorphic InAs buffer layers

Type II InSb/InAs quantum dots (QDs) were successfully grown on GaAs substrates using three different metamorphic buffer layer (MBL) designs. The structural properties of the resulting metamorphic InAs buffer layers were studied and compared using cross-sectional transmission electron microscopy and high resolution x-ray diffraction measurements. Photoluminescence (PL) originating from the InSb...

متن کامل

Multi-scale ordering of self-assembled InAs/GaAs(001) quantum dots

Ordering phenomena related to the self-assembly of InAs quantum dots (QD) grown on GaAs(001) substrates are experimentally investigated on different length scales. On the shortest length-scale studied here, we examine the QD morphology and observe two types of QD shapes, i.e., pyramids and domes. Pyramids are elongated along the [1–10] directions and are bounded by {137} facets, while domes hav...

متن کامل

The effect of encapsulation on the morphology and chemical composition of InAs/GaAs quantum dots grown by molecular beam epitaxy

In order to fabricate an effective device structure based on InAs quantum dots (QDs), the QD layers must be encapsulated within a matrix that has a wider band gap. This encapsulation is usually achieved by the overgrowth of GaAs. Coherent strained InAs/GaAs islands, which were previously formed on the (0 0 1) GaAs substrate surface, can then be buried in the semiconductor matrix to form QDs. Th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 4  شماره 

صفحات  -

تاریخ انتشار 2009