Formation and Corrosion Resistance of Micro-Arc Oxidation Coating on Equal-Channel Angular Pressed AZ91D Mg Alloy
نویسندگان
چکیده
Aibin Ma 1,2,*, Fumin Lu 1, Qi Zhou 1, Jinghua Jiang 1,*, Dan Song 1,2, Jianqing Chen 1 and Yuxi Zheng 1 1 College of Mechanics and Materials, Hohai University, Nanjing 210098, China; [email protected] (F.L.); [email protected] (Q.Z.); [email protected] (D.S.); [email protected] (J.C.); [email protected] (Y.Z.) 2 Suqian Institute, Hohai University, Suqian 223800, China * Correspondence: [email protected] (A.M.); [email protected] (J.J.); Tel.: +86-25-8378-7239 (A.M. & J.J.); Fax: +86-25-8378-6046 (A.M. & J.J.)
منابع مشابه
A study of oxidation behavior of AZ91D alloy with YSZ coating using EIS
Oxidation behavior of AZ91D magnesium alloy with 3YSZ coating and aluminum interlayer was studied in air at 250 °C using electrochemical impedance spectroscopy EIS, scanning electron microscopy SEM, and X-ray diffraction XRD. The oxidation process was carried out in various duration times from 1 to 10 h. A three-electrode electrochemical cell was employed for all the EIS measurements. Also, to ...
متن کاملCharacterization of hydroxyapatite containing micro-arc oxidation coating on ZK60 magnesium alloy
INTRODUCTION: Magnesium alloys are attractive as a class of biodegradable metallic materials. However, too fast degradation is an obstacle to their clinical applications. Recently, micro-arc oxidation (MAO) coatings were applied on biodegradable magnesium alloys to delay their degradation. In vivo studies showed that the protective ability of the MAO coating should be further improved [1]. Seal...
متن کاملCorrosion Resistance Enhancement of AZ91 Magnesium Alloy Using Ni-P Interlayer and Electrophoretic Deposited 3YSZ Coating
The zirconia stabilized by 3mol % Y2O3 (3YSZ) was applied onto the surface of the magnesium alloy AZ91D using electrophoretic deposition (EPD) from a non- aqueous solution. A Ni-P interlayer between the substrate and YSZ coating was also prepared by electroless plating. Finally, coatings were heat treated in control atmosphere at 400 °C. The preparation, microstructure and corrosion resistance ...
متن کاملEffect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy
In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...
متن کاملMicrostructure and corrosion characteristics of laser-alloyed magnesium alloy AZ91D with Al-Si powder.
Blown-powder laser surface alloying was performed on the magnesium alloy AZ91D with Al-Si alloy powder to improve corrosion resistance. Characterization by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and x-ray diffraction (XRD) analysis revealed that intermetallic compounds (IMCs) of Mg2Si, Al12Mg17 and Al3Mg2 were formed in the matrix of α-Mg and Al solid solutions...
متن کامل