Two- and three-dimensional equilibrium morphology of a misfitting particle and the Gibbs–Thomson effect
نویسندگان
چکیده
The equilibrium shapes of misfitting precipitates in elastically anisotropic systems are obtained in both two and three dimensions, and the corresponding Gibbs–Thomson equation is derived as a function of the characteristic ratio between elastic and interfacial energies, L 0. The effect of elastic inhomogeneity is investigated systematically. For soft or moderately hard particles, the stable equilibrium shape bifurcates from a fourfold symmetric shape to a twofold symmetric one in 2D and from a cubic symmetric shape to a plate-like one in 3D. For a very hard particle, the shape bifurcation is not observed in 2D for the range of L 0 investigated, but both plate-like and rod-like shapes are found in 3D. The computed Gibbs–Thomson equation is well approximated by a piecewise linear function of L 0. Predictions are made for coarsening of many-particle systems based on an established mean-field theory. The results predict that the elastic stress has no effect on coarsening kinetics where most particles are highly symmetric (fourfold in 2D and cubic in 3D), and the exponent remains 1/3 but the rate constant increases if stress is sufficient to induce symmetry-breaking bifurcation on
منابع مشابه
Effect of chelating agent on Hydroxyapatite morphology under hydrothermal process
Citrate was used as chelating or morphology regulating agent in this study. In the presence of regulating agent a two-dimensional monetite phase evolved into three-dimentional hydroxyapatite microspheres with an average diameter of 4 µm. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies revealed the importance of Ca/citrate ratio in regulating the particle m...
متن کاملA Numerical Simulation Study on the Kinetics of Asphaltene Particle Flocculation in a Two-dimensional Shear Flow
In the current study, the kinetics of asphaltene particle flocculation is investigated under a shear flow through numerical simulation. The discrete element method (DEM) is coupled with computational fluid dynamics (CFD) to model the agglomeration and fragmentation processes. In addition, a coalescence model is proposed to consider the attachment of colliding particles. The changes in mean asph...
متن کاملPolymerization of propylene in a minireactor: Effect of polymerization conditions on particle morphology
Gas phase polymerization of propylene was carried out in a semi-batch minireactor using a commercially supported Ziegler–Natta (ZN) catalyst. The influence of variables including monomer partial pressure, external electron donor, reaction temperature and time on the particle morphology and size distribution was investigated. Generally, more uniform fragmentation and particle densities were obta...
متن کاملON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY
The governing equations of three dimensional elasticity problems include the six Beltrami-Michell stress compatibility equations, the three differential equations of equilibrium, and the six material constitutive relations; and these are usually solved subject to the boundary conditions. The system of fifteen differential equations is usually difficult to solve, and simplified methods are usual...
متن کاملPhase field study of precipitate growth: Effect of misfit strain and interface curvature
We have studied diffusion controlled growth of an isolated, misfitting precipitate in a supersaturated matrix using a phase field model. Treating our simulations as computer experiments, we have critically compared our simulation results with those from Zener-Frank and Laraia-Johnson theories for the growth of non-misfitting and misfitting precipitates, respectively. The agreement between simul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004