Beam Loading in Rf Cavities
نویسنده
چکیده
Beam loading is the conventional term for the effect of beam passage through an RF cavity installed for the control of some beam parameters such as energy, bunch length, energy spread, etc... The fields developed in such a structure and their effect on the beam can be analyzed as for all other discontinuities of the vacuum chamber. In particular, F. Sacherer's theory of impedances and beam instabilities [1] is perfectly relevant.
منابع مشابه
Superconducting Rf Control Issues at Cesr*
RF controls of the superconducting cavities have to deal with an extremely heavy beam loading in CESR. A feature of the CESR RF system operation is that superconducting cavities are under-coupled at high beam currents. This means that the RF system operates very close to Robinson stability limit. Analysis of the steadystate stability of the CESR RF system and the results of measurements with be...
متن کاملLow-Level RF System Design for the Accelerator Test Facility (ATF) Damping Ring
The ATF damping ring [1] was built to demonstrate the production of low emittance, high current beams for future linear colliders. To attain high beam currents, multiple high current bunch trains are required. The low-level rf system should be designed to minimize both steady-state and transient beam loading effects in the accelerating cavities. In addition the design should be sufficiently fle...
متن کاملCONSTRUCTION OF A 714-MHz RF SYSTEM FOR THE ATF DAMPING RING
A 714-MHz RF system for the Accelerator Test Facility (ATF) damping ring has been constructed and commissioned. The RF system comprises two higherorder-mode (HOM) damped cavities, a 50-kW klystron, a WR-1150 waveguide network and low-level RF electronics. By using HOM-damped cavities, longitudinal and transverse coupled-bunch instabilities can be avoided even at a maximum beam current of 600mA....
متن کاملComputed Transient Beam Loading Effects with Harmonic RF Systems
Harmonic cavities have been used in storage rings to lengthen bunches and increase beam lifetimes dominated by Touschek scattering. Transient beam loading in the harmonic cavities generated by asymmetries in the fill pattern can cause significant variation of the beam phase and bunch length along the bunch train when the longitudinal restoring force has been reduced, resulting in a significant ...
متن کاملUsing Passive Cavities for Bunch Shortening in Cesr*
Passive (beam-driven) superconducting cavities can be used in storage rings for bunch shortening when necessary high RF voltage can be achieved only by using multiple cavities, but the beam power consumption does not justify using all of them in the active mode, powered by klystrons. An example is the ee collider CESR running with a beam energy below 2.5 GeV as a charm-tau factory (CESR-c) [1]....
متن کامل