Corrosion and Its Inhibition in Water-Based Drilling Fluid Used in Onshore Oilfied
نویسندگان
چکیده
This study deals with onshore oilfield drilling fluid system to drill corrosion. Corrosion under static and dynamic conditions of the drilling fluid was evaluated. The effect of temperature and pressure on corrosion was examined. Corrosion was more severely affected by temperature compared to pressure. The combined effect of a deoxidizing agent and an inhibitor was observed to exhibit better protection against corrosion by the drilling fluid.
منابع مشابه
An Experimental Study of the Effect of Amines on Polymer Efficiency and Thermal Stability of Water-based Drilling Fluid
Amine compounds are believed to have acceptable results regarding their use as clay swelling inhibitor and corrosion inhibitor additives in drilling fluids. It is crucial to know the capability of amine compounds to enhance the thermal stability of drilling fluid; herein, a water-based fluid composed of biopolymer and other additives as the proper representatives of muds used in the pay zone se...
متن کاملImprovement of Thermal Conductivity Properties of Drilling Fluid by CuO Nanofluid
In a recent decade, application of nanofluid as a candidate for heat transfer medium has gaining an increasing attention due to its unique advantages. In the light of its unique advantages, it has been utilized in different industries such as oil and gas industries. In this work aims at improving thermal conductivity of the water-based drilling fluid by using the CuO nanofluid additive. CuO nan...
متن کاملInvestigating the Bio-corrosion Inhibition Effect of Enzymes in Circulating Cooling Water System
To avoid the secondary pollution that inorganic corrosion inhibitor may cause in circulating cooling water, the bio-corrosion inhibition effect of lysozyme, catalase, lipase, and laccase, as the biologic inhibitors without the above problem, and the increased bio-corrosion inhibition effect of Ca+2 and Mg+2 are studied. An enzyme with corrosion properties was selected by rotary coupon test. The...
متن کاملStudy on Rheological Property Control Method of “Three High” Water Based Drilling Fluid
The rheological regulation of the “three high” (high temperature, high density and high salinity) water-based drilling fluid is a worldwide problem due to the combined influence of temperature, solid content and salinity. This paper investigates the factors and regulation methods about rheological property of “three high” water based drilling fluid, and the effects of clay, salinity and weighti...
متن کاملApplication of Nano-Particles of Clay to Improve Drilling Fluid
Drilling fluids are an essential component of the rotary drilling process used to drill for oil and gas on land and offshore environments. The injection of this nano particle into drilling fluid increases the viscosity levels fluids. In these experiments, the rheological properties of the fluid including apparent viscosity (AV), plastic viscosity (PV), yielding point (YP), mud c...
متن کامل