Asymptotic study of the interfacial crack with friction
نویسنده
چکیده
We study a model of interfacial crack in which contact of the crack faces obeys a Coulomb law of friction. For such cracks, the possibility that the stress has a stronger singularity than rÿ1=2 near the tip has been reported. In this paper, we demonstrate that these strong singularities can, in fact, be discarded, because they would assume a backward propagation of the crack. In passing, we prove that near-tip slip is possible in one direction only, which is imposed by the sign of the elastic mismatch. The locking of the stress intensity factor during a non-monotonic cycle of loading is pointed out, as well as the formation of a bubble near the tip under certain loading conditions. 7 2000 Elsevier Science Ltd. All rights reserved.
منابع مشابه
Friction in Adhesion
The effect of interfacial friction on adhesion was studied by using a model system, in which a thin strip of silicone elastomer was peeled from a PDMS (poly(dimethylsiloxane)) treated glass slide. The fluorescent particle tracking method revealed that the elastomer stretches and slides on glass well before the crack faces open up. Interfacial energy dissipation due to friction, which is the pro...
متن کاملEffects of interfacial friction on flaw tolerant adhesion between two dissimilar elastic solids
Flaw tolerance refers to a state in which a pre-existing crack-like flaw does not propagate even as the material is stretched to failure near its theoretical strength. Such an optimal scenario can be achieved when the characteristic length scale is reduced to below a critical value. So far, the critical conditions to achieve flaw tolerance have been discussed mostly for homogeneous materials or...
متن کاملPartition of unity enrichment for bimaterial interface cracks
Partition of unity enrichment techniques are developed for bimaterial interface cracks. A discontinuous function and the two-dimensional near-tip asymptotic displacement functions are added to the finite element approximation using the framework of partition of unity. This enables the domain to be modelled by finite elements without explicitly meshing the crack surfaces. The crack-tip enrichmen...
متن کاملCriteria for Progressive Interfacial Debonding with Friction in Fiber-reinforced Ceramic Composites
Criteria for progressive debonding at the fiber/mattix interface with friction along the debonded interface are considered for fiber-reinfoxed ceramic composites. The energy-based criterion is adopted to analyze the debond length, the crack-opening displacement, and the displacement of the composite due to interfacial debonding. The analytical solutions are identical to those obtained from the ...
متن کاملEvaluation of Microstructure and Mechanical Properties of Ti6A14V / (WC-Co) Friction Welds
The metallurgical and mechanical properties of Ti6Al4V/(WC-Co) friction welds have ben investigated. The microstructure close to the bondline comprised a mixture of acicular and equiaxed α plus β phases. The diffusion of elements in the welded specimens has been detected. The fracture strengths of Ti6Al4V/(WC-Co) friction welds markedly improved when the cobalt content in the (WC-Co) carbide su...
متن کامل