Design of Controlled RF Switch for Beam Steering Antenna Array
نویسندگان
چکیده
A printed dipole antenna integrated with a duplex RF switch used for mobile base station antenna beam steering is presented. A coplanar waveguide to coplanar strip transition was adopted to feed the printed dipole. A novel RF switch circuit, used to control the RF signal fed to the dipole antenna and placed directly before the dipole, was proposed. Simulated and measured data for the CWP-to-CPS balun as well as the measured performance of the RF switch are shown. It has demonstrated the switch capability to control the beam in the design of beam steering antenna array for mobile base station applications.
منابع مشابه
Design of Rotman Lens Antenna at Ku-Band Based on Substrate Integrated Technology
In this research work, a multibeam antenna which is a combination of a beamformer network (BFN) and a linear array antenna, has been designed. A Rotman lens has been chosen as beamformer network and Vivaldi antennas have been selected for constructing array antenna. The Substrate Integrated Waveguide (SIW) was used for implementing Rotman lens. After explanation the structure of Substrate integ...
متن کاملAntenna Beam Steering Without Phase Shifters – an ‘Old’ Technique Revisited
Antenna arrays are of perennial interest and relevance to RF wireless system designers, indeed the rise of 5G is showing their importance is only growing. Most implementations of linear arrays use phase shifters to feed the array and hence form the main-lobe beam. In the 1960s, a technique using RF switches and Fourier analysis was discovered to be a viable alternative to phase shifters called ...
متن کاملReal-Time Software Receiver for GPS Controlled Reception Pattern Antenna Array Processing
This paper demonstrates a real-time software receiver supporting GPS L1 C/A controlled reception pattern antenna (CRPA) processing. The software receiver is implemented on a widely-available recent generation multi-core processor and is capable of processing array signals from either radio frequency (RF) front-end modules or collected datasets. Most importantly, the receiver allocates dedicated...
متن کاملDesign and Fabrication of Plasma Array Antenna with Beam Forming
In this paper, the design and implementation of plasma antenna array with beam forming is discussed. The structure consists of a circular array of plasma tube enclosed in a unipolar UHF band monopole antenna. Beam forming is possible by stimulated plasma tubes. The combination of the above antenna with plasma excitation controller makes a beam forming smart antenna. An experimental model in UHF...
متن کاملNull Steering GPS Array in the Presence of Mutual Coupling
A null steering GPS antenna array is designed in this paper. In the proposed method, the exact full wave antenna radiation properties with the effect of mutual couplings and nearby scatterers are considered to calculate the array steering vector, precisely. Although the proposed method is not constrained by the array geometry and the antenna element specifications, a five patch antenna elements...
متن کامل