Multifunctional Alloys Obtained via a Dislocation-Free Plastic Deformation Mechanism.

نویسندگان

  • Takashi Saito
  • Tadahiko Furuta
  • Jung-Hwan Hwang
  • Shigeru Kuramoto
  • Kazuaki Nishino
  • Nobuaki Suzuki
  • Rong Chen
  • Akira Yamada
  • Kazuhiko Ito
  • Yoshiki Seno
  • Takamasa Nonaka
  • Hideaki Ikehata
  • Naoyuki Nagasako
  • Chihiro Iwamoto
  • Yuuichi Ikuhara
  • Taketo Sakuma
چکیده

We describe a group of alloys that exhibit "super" properties, such as ultralow elastic modulus, ultrahigh strength, super elasticity, and super plasticity, at room temperature and that show Elinvar and Invar behavior. These "super" properties are attributable to a dislocation-free plastic deformation mechanism. In cold-worked alloys, this mechanism forms elastic strain fields of hierarchical structure that range in size from the nanometer scale to several tens of micrometers. The resultant elastic strain energy leads to a number of enhanced material properties.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Recovery of strain-hardening rate in Ni-Si alloys

In this study, the recovery of strain-hardening rate (RSHR) was discovered for the first time in polycrystalline materials (Ni-Si alloys) that have only dislocation activities during tensile test. Detailed microstructure characterizations show that the activation of dislocations in the secondary slip systems during tensile deformation is the major reason for this RSHR. By taking into account ot...

متن کامل

Plastic-deformation mechanism in complex solids.

In simple crystalline materials, plastic deformation mostly takes place by the movement of dislocations. Although the underlying mechanisms in these materials are well explored, in complex metallic alloys--crystalline solids containing up to thousands of atoms per unit cell--the defects and deformation mechanisms remain essentially unknown. Owing to the large lattice parameters of these materia...

متن کامل

A dislocation-scale characterization of the evolution

In this work, plastic deformation was locally introduced at room temperature by 12 nanoindentation on a γ-TiAl based alloy. Comprehensive analyzes of microstructures were 13 performed before and after deformation. In particular, the Burgers vectors, the line directions and 14 the mechanical twinning systems were studied via accurate electron channeling contrast imaging. 15 Accommodation of the ...

متن کامل

The Dislocation-Enhanced Finkelshtain-Rosin Effect (DEFRE) in Austenitic Steels

A systematic study of the influence of plastic deformation and low temperature ageing on the carbon Dislocation Enhanced Finkelshtain Rosin Effect (DEFREIC) in austenitic alloys of Fe-Ni, Fe-Ni-MO, Fe-Mn-A1 and Fe-Cr-Ni systems with different carbon content is reported. The experiments prove that after plastic deformation at room temperature the FR effect is transformed into DEFREIC. nith both ...

متن کامل

Dislocations interaction induced structural instability in intermetallic Al2Cu

Intermetallic precipitates are widely used to tailor mechanical properties of structural alloys but are often destabilized during plastic deformation. Using atomistic simulations, we elucidate structural instability mechanisms of intermetallic precipitates associated with dislocation motion in a model system of Al2Cu. Interaction of non-coplanar <001> dislocation dipoles during plastic deformat...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Science

دوره 300 5618  شماره 

صفحات  -

تاریخ انتشار 2003