Development, characterization, and validation of porous carbonated hydroxyapatite bone cement.

نویسندگان

  • Pei-Fu Tang
  • Gang Li
  • Ji-Fang Wang
  • Qiu-Jian Zheng
  • Yan Wang
چکیده

Carbonated hydroxyapatite (CHA) bone cement is capable of self-setting and forming structures similar to mineralized bone. Conventional CHA leaves little room for new bone formation and delays remodeling. The purposes of this study were to develop porous CHA (PCHA) bone cement and to investigate its physicochemical properties, biocompatibility, biodegradation, and in vivo bone repair potential. Vesicants were added to modify CHA, and the solidification time, porosity, and pore size of the PCHA cements were examined. The cytotoxicity and bone repair potential of PCHA were tested in a rabbit bone defect model and assessed by x-ray, histological examination, and mechanical testing. The porosity of the modified PCHA was 36%; 90.23% of the pores were greater than 70 mum, with a calcium/phosphate ratio of 1.64 and a solidification time of 15 minutes. The PCHA did not affect bone cell growth in vitro, and the degrading time of the PCHA was two and four times faster in vitro and in vivo when compared to CHA. In the bone defect model, the amount of new bone formation in the PCHA-treated group was eight times greater than that of the CHA group; the compressive strength of the PCHA setting was relatively weak in the first weeks but increased significantly at 8 to 16 weeks compared to the CHA group. The PCHA has stable physicochemical properties and excellent biocompatibility; it degrades faster than CHA, provides more porous spaces for new bone ingrowths, and may be a new form of bone cement for the management of bone defects.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation of porous apatite granules from calcium phosphate cement.

A versatile method for preparing spherical, micro- and macroporous (micro: 2-10 and macro: 150-550 microm pores), carbonated apatitic calcium phosphate (Ap-CaP) granules (2-4 mm in size) was developed by using NaCl crystals as the porogen. The entire granule production was performed between 21 and 37 degrees C. A CaP cement powder, comprising alpha-Ca3(PO4)2 (61 wt.%), CaHPO4 (26%), CaCO3 (10%)...

متن کامل

Selective laser sintering of porous tissue engineering scaffolds from poly(L: -lactide)/carbonated hydroxyapatite nanocomposite microspheres.

This study focuses on the use of bio-nanocomposite microspheres, consisting of carbonated hydroxyapatite (CHAp) nanospheres within a poly(L: -lactide) (PLLA) matrix, to produce tissue engineering (TE) scaffolds using a modified selective laser sintering (SLS) machine. PLLA microspheres and PLLA/CHAp nanocomposite microspheres were prepared by emulsion techniques. The resultant microspheres had ...

متن کامل

Comparative Study of Bone Repair Using Porous Hydroxyapatite/ β-Tricalcium Phosphate and Xenograft Scaffold in Rabbits with Tibia Defect

Background: Bone tissue engineering requires materials that are biocompatible, mechanically suited for bone function, integrated with the host skeleton, and support osteoinduction of the implanted cells for new bone formation. The aim of this study was to compare the osteogenic potential of xenograft with hydroxyapatite/β- tricalcium phosphate (HA/β-TCP) scaffold. Methods: New Zealand rabbits (...

متن کامل

Fabrication of Porous Hydroxyapatite-Gelatin Scaffolds Crosslinked by Glutaraldehyde for Bone Tissue Engineering

In this study, to mimic the mineral and organic components of natural bone, hydroxyapatite[HA] and gelatin[GEL] composite scaffolds were prepared using the solvent-casting method combined with a freeze drying process. Glutaraldehyde[GA] was used as a cross linking agent and sodium bisulfite was used as an excess GA discharger. Using this technique, it is possible to produce scaffolds with mecha...

متن کامل

Drug Release from a Three-Dimensionally Perforated Porous Apatite/Collagen Composite Cement

Artificial bone (PC, containing 3% indomethacin) with biocompatibility, inter-connective pore structure, and drug delivery ability was obtained from self-setting apatite/collagen composite cement. X-ray powder diffraction and FT-IR spectroscopy suggested that PC consisted of carbonated apatite and had a structure similar to that of natural rat bone. The IMC release rates from a PC block contain...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of biomedical materials research. Part B, Applied biomaterials

دوره 90 2  شماره 

صفحات  -

تاریخ انتشار 2009