Planar Cable-Direct-Driven Robots: Design for Wrench Exertion

Interval Analysis of Controllable Workspace for Cable Robots

Workspace analysis is one of the most important issues in the robotic parallel manipulator design. ‎However, ‎the unidirectional constraint imposed by cables causes this analysis more challenging in the cabledriven redundant parallel manipulators. Controllable workspace is one of the general workspace in the cabledriven redundant parallel manipulators due to the dependency on geometry parameter...

Planar Cable-suspended Haptic Interface: Design for Wrench Exertion

Cable-suspended robots and haptics interfaces are appealing because of their structural simplicity, high stiffness, and high exerted wrench-to-weight ratio. A major drawback is that cables cannot push but can only exert tension. Therefore, actuation redundancy is required; even so, certain configurations and wrenches will fail since they would require one or more cables to push. The objective o...

Stability Analysis and Robust PID Control of Cable Driven Robots Considering Elasticity in Cables

In this paper robust PID control of fully-constrained cable driven parallel manipulators with elastic cables is studied in detail. In dynamic analysis, it is assumed that the dominant dynamics of cable can be approximated by linear axial spring. To develop the idea of control for cable robots with elastic cables, a robust PID control for cable driven robots with ideal rigid cables is firstly de...

Modeling and Wrench Feasible Workspace Analysis of a Cable Suspended Robot for Heavy Loads Handling

Modeling and Wrench feasible workspace analysis of a spatial cable suspended robots is presented. A six-cable spatial cable robot is used the same as Stewart robots. Due to slow motion of the robot we suppose the motion as pseudostatic and kinetostatic modeling is performed. Various workspaces are defined and the results of simulation are presented on the basis of various workspaces and app...

Disturbance Robustness Measures and Wrench-Feasibile Workspace Generation Techniques for Cable-Driven Robots