Cation Exchange Membranes by Radiation-Induced Graft Copolymerization of Styrene onto PFA Copolymer Films. III. Thermal Stability of the Membranes
نویسندگان
چکیده
Thermal stability of cation exchange, PFA-g-polystyrene sulfonic acid membranes prepared by radiation-induced graft copolymerization of styrene onto PFA films followed by sulfonation was studied by thermal gravimetric analysis (TGA) and oven heat treatment. The tested samples included original and grafted PFA films as reference materials. All the membranes showed multistep decomposition patterns due to dehydration, desulfonation, dearomatization, and decomposition of the PFA matrix. Investigations of the individual decomposition behaviors showed that the weight loss strongly depends upon the degree of grafting. However, the decomposition temperatures were found to be independent of the degree of grafting. The loss in some selected membrane properties such as ion exchange capacity and water uptake was found to be function of the degree of grafting, temperature, and the time of heat treatment. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1877–1885, 2000
منابع مشابه
Cation Exchange Membranes by Radiation-Induced Graft Copolymerization of Styrene onto PFA Copolymer Films. IV. Morphological Investigations Using X-Ray Photoelectron Spectroscopy
Morphological investigations of poly(tetrafluoroethylene-co-perfluorovinyl ether) (PFA)-g-polystyrene sulfonic acid membranes prepared by radiation-induced graft copolymerization of styrene onto PFA films followed by sulfonation were performed by X-ray photoelectron spectroscopy. The analyzed materials included grafted film and sulfonated membrane samples having various degrees of grafting. Ori...
متن کاملProton Exchange Membranes Prepared by Simultaneous Radiation Grafting of Styrene onto Poly(tetrafluoroethylene-co-hexafluoropropylene) Films. II. Properties of Sulfonated Membranes
Proton exchange membranes were prepared by radiation-induced grafting of styrene onto commercial poly(tetrafluoroethylene-co-hexafluoropropylene) films using a simultaneous irradiation technique followed by a sulfonation reaction. The resulting membranes were characterized by measuring their physicochemical properties such as water uptake, ion exchange capacity, hydration number, and proton con...
متن کاملFabrication and Characterization of Proton Conductive Membranes Based on Poly(methyl methacrylate-co-maleic anhydride)
In this study, proton conductive composite membranes were produced by using a poly(methylmethacrylate-co-maleic anhydride) (P(MMA-co-MAH)) copolymer and phosphotungstic Acid (PWA) as an additive of the proton conductive agent. P(MMA/MAH) 70/30, 50/50, and 30/70 were synthesized using a free radical polymerization reaction. PWA with a concentration of 2% was added to...
متن کاملPreparation of Reactive and Thermal Stable Hyperbranched Graft Copolymers/ Clay Nanocomposite via ‘Living’ Free Radical Polymerization
Exfoliated poly (Chloromethyl styrene-co-styrene)-g-polyacrylonitryle/organo- modified montmorillonite [P(CMSt-co-St)-g-PAN/O-MMT] nanocomposite was synthesized through solution intercalation method by using atom transfer and nitroxide mediated radical polymerization. At first, poly (chloromethyl styrene-costyrene) copolymer was synthesized by nitroxide - mediated “living” free radical polyme...
متن کاملThin Film Heterogeneous Ion Exchange Membranes Prepared by Interfacial Polymerization of PAA-co-Iron-Nickel Oxide Nanoparticles on Polyvinylchloride Based Substrate
In this research thin film heterogeneous cation exchange membrane was prepared by interfacial polymerization of polyacrylic acid-co-iron nickel oxide nanoparticle son PVC based substrate. Spectra analysis confirmed graft polymerization conclusively. The SEM images showed that polymerized layer covers the membranes by simple gel network entanglement. Results exhibited that membrane water content...
متن کامل