Annealing free, clean graphene transfer using alternative polymer scaffolds.
نویسندگان
چکیده
We examine the transfer of graphene grown by chemical vapor deposition (CVD) with polymer scaffolds of poly(methyl methacrylate) (PMMA), poly(lactic acid) (PLA), poly(phthalaldehyde) (PPA), and poly(bisphenol A carbonate) (PC). We find that optimally reactive PC scaffolds provide the cleanest graphene transfers without any annealing, after extensive comparison with optical microscopy, x-ray photoelectron spectroscopy, atomic force microscopy, and scanning tunneling microscopy. Comparatively, films transferred with PLA, PPA, PMMA/PC, and PMMA have a two-fold higher roughness and a five-fold higher chemical doping. Using PC scaffolds, we demonstrate the clean transfer of CVD multilayer graphene, fluorinated graphene, and hexagonal boron nitride. Our annealing free, PC transfers enable the use of atomically-clean nanomaterials in biomolecule encapsulation and flexible electronic applications.
منابع مشابه
Rosin-enabled ultraclean and damage-free transfer of graphene for large-area flexible organic light-emitting diodes
The large polymer particle residue generated during the transfer process of graphene grown by chemical vapour deposition is a critical issue that limits its use in large-area thin-film devices such as organic light-emitting diodes. The available lighting areas of the graphene-based organic light-emitting diodes reported so far are usually <1 cm2. Here we report a transfer method using rosin as ...
متن کاملUltra-large suspended graphene as a highly elastic membrane for capacitive pressure sensors.
In this work, we fabricate ultra-large suspended graphene membranes, where stacks of a few layers of graphene could be suspended over a circular hole with a diameter of up to 1.5 mm, with a diameter to thickness aspect ratio of 3 × 10(5), which is the record for free-standing graphene membranes. The process is based on large crystalline graphene (∼55 μm) obtained using a chemical vapor depositi...
متن کاملImproved performance and stability of field-effect transistors with polymeric residue-free graphene channel transferred by gold layer.
One of the most significant issues that occurs when applying chemical-vapor deposited (CVD) graphene (Gr) to various high-performance device applications is the result of polymeric residues. Polymeric residues remain on the Gr surface during Gr polymer support transfer to an arbitrary substrate, and these residues degrade CVD Gr electrical properties. In this paper, we propose that a thin layer...
متن کاملThe influence of thermal annealing to remove polymeric residue on the electronic doping and morphological characteristics of graphene
The impact of polymer removal by forming gas and vacuum annealing on the doping, strain, and morphology of chemical vapor deposited (CVD) and mechanically exfoliated (ME) graphene is investigated using Raman spectroscopy and atomic force microscopy (AFM). The behavior of graphene exposed and unexposed to polymer is compared. It is found that the well-known doping effect after forming gas anneal...
متن کاملFabrication and Characterization of Three-Dimensional Macroscopic All-Carbon Scaffolds.
We report a simple method to fabricate macroscopic, 3-D, free standing, all-carbon scaffolds (porous structures) using multiwalled carbon nanotubes (MWCNTs) as the starting materials. The scaffolds prepared by radical initiated thermal crosslinking, and annealing of MWCNTs possess macroscale interconnected pores, robust structural integrity, stability, and conductivity. The porosity of the thre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Nanotechnology
دوره 26 5 شماره
صفحات -
تاریخ انتشار 2015