Preparative Steps Towards the New Definition of the Kelvin in Terms of the Boltzmann Constant
نویسندگان
چکیده
The International Committee for Weights and Measures (CIPM) approved, in its Recommendation 1 of 2005, preparative steps towards new definitions of the kilogram, the ampere, the kelvin, and the mole in terms of fundamental constants. Within the Consultative Committee for Thermometry (CCT), a task group (TG-SI) H. Ugur is the President, Consultative Committee for Thermometry (CCT). J. Fischer (B) Physikalisch-Technische Bundesanstalt (PTB), Braunschweig and Berlin, Germany e-mail: [email protected] S. Gerasimov D.I. Mendeleyev Institute for Metrology (VNIIM), St. Petersburg, Russia K. D. Hill National Research Council of Canada (NRC), Ottawa, Canada G. Machin National Physical Laboratory (NPL), Teddington, UK M. R. Moldover National Institute of Standards and Technology (NIST), Gaithersburg, MD, USA L. Pitre Conservatoire national des arts et métiers/Institut National de Métrologie (LNE-INM/CNAM), La Plaine-Saint-Denis, France P. Steur Istituto Nazionale di Ricerca Metrologica (INRiM), Turin, Italy M. Stock Bureau International des Poids et Mesures (BIPM), Sevres, France O. Tamura National Metrology Institute of Japan, AIST (NMIJ/AIST), Tsukuba, Japan H. Ugur Teknoyad, Gebze-Kocaeli, Turkey
منابع مشابه
Redefinition of the kilogram, ampere, kelvin and mole: a proposed approach to implementing CIPM recommendation 1 (CI-2005)
The International System of Units (SI) is founded on seven base units, the metre, kilogram, second, ampere, kelvin, mole and candela corresponding to the seven base quantities of length, mass, time, electric current, thermodynamic temperature, amount of substance and luminous intensity. At its 94th meeting in October 2005, the International Committee for Weights and Measures (CIPM) adopted a re...
متن کاملUsing the Lattice Boltzmann Method for the numerical study of non-fourier conduction with variable thermal conductivity
The lattice Boltzmann method (LBM) was used to analyze two-dimensional (2D) non-Fourier heat conduction with temperature-dependent thermal conductivity. To this end, the evolution of wave-like temperature distributions in a 2D plate was obtained. The temperature distributions along certain parts of the plate, which was subjected to heat generation and constant thermal conductivity condit...
متن کاملDynamic Behavior of an Oil Droplet Adhered to the Wall Surface in a Channel Flow by the Lattice Boltzmann Method
The Lattice Boltzmann Method is used to simulate the dynamics of droplet deformation in a channel flow under various conditions. The droplet behavior has been investigated under transient conditions. For cases where the droplet remains attached to the surface, the shape deformation of the droplet during crawling is captured. It has been shown that there is a limiting value for the droplet volum...
متن کاملNumerical analysis of gas flows in a microchannel using the Cascaded Lattice Boltzmann Method with varying Bosanquet parameter
Abstract. In this paper, a Cascaded Lattice Boltzmann Method with second order slip boundary conditions is developed to study gas flows in a microchannel in the slip and transition flow regimes with a wide range of Knudsen numbers. For the first time the effect of wall confinement is considered on the effective mean free path of the gas molecules using a function with nonconstant Bosanquet para...
متن کاملAutoconvolution equations and generalized Mittag-Leffler functions
This article is devoted to study of the autoconvolution equations and generalized Mittag-Leffler functions. These types of equations are given in terms of the Laplace transform convolution of a function with itself. We state new classes of the autoconvolution equations of the first kind and show that the generalized Mittag-Leffler functions are solutions of these types of equations. In view of ...
متن کامل