Pulsed laser deposition of single-crystalline Cu7In3/CuIn0.8Ga0.2Se2 core/shell nanowires
نویسندگان
چکیده
UNLABELLED Single-crystalline Cu7In3/CuIn0.8Ga0.2Se2 (CI/CIGS) core/shell nanowires are fabricated by pulsed laser deposition with Ni nanoparticles as catalyst. The CI/CIGS core/shell nanowires are made up of single-crystalline CI cores surrounded by single-crystalline CIGS shells. The CI/CIGS nanowires are grown at a considerably low temperature (350°C ~ 450°C) by vapor-liquid-solid mode combined with vapor-solid mode. The distribution density of the nanowires increases with the increasing of the deposition duration, and the substrate temperature determines the lengths of the nanowires. The U-V absorption spectra of the CIGS thin films with and without the CI/CIGS core/shell nanowires demonstrate that the CI/CIGS nanowires can remarkably enhance the absorption of CIGS thin films in the spectrum range of 300 to 900 nm. PACS 61.46. + w; 61.41.e; 81.15.Fg; 81.07.b.
منابع مشابه
Efficient synthesis and electronic studies of core-shell nanowires based on colossal magnetoresistive manganites.
We report our recent study on the pulsed laser deposition process in the synthesis of colossal magnetoresistive MgO/LaCaMnO3 and MgO/LaSrMnO3 core-shell nanowires. A highly efficient process has been developed by depositing an epitaxial layer of manganite onto randomly oriented MgO nanowires grown on SiO2/Si substrates. In addition, in-depth studies revealed that the sample-target distance play...
متن کاملA General Approach for Fabricating Arc?Shaped Composite Nanowire Arrays by Pulsed Laser Deposition
Here, a new method is demonstrated that uses sideways pulsed laser deposition to deliberately bend nanowires into a desired shape after growth and fabricate arc-shaped composite nanowire arrays of a wide range of nanomaterials. The starting nanowires can be ZnO, but the materials to be deposited can be metallic, semiconductor, or ceramic depending on the application. This method provides a gene...
متن کاملEnhancing the light absorbance of polymer solar cells by introducing pulsed laser-deposited CuIn0.8Ga0.2Se2 nanoparticles
UNLABELLED Evenly separated crystalline CuIn0.8Ga0.2Se2 (CIGS) nanoparticles are deposited on ITO-glass substrate by pulsed laser deposition. Such CIGS layers are introduced between conjugated polymer layers and ITO-glass substrates for enhancing light absorbance of polymer solar cells. The P3HT:PCBM absorbance between 300 and 650 nm is enhanced obviously due to the introduction of CIGS nanopar...
متن کاملControlled growth of Si-based heterostructure nanowires and their structural and electrical properties
Ni-catalyzed Si-based heterostructure nanowires grown on crystal Si substrates by hot-wire chemical vapor deposition (HWCVD) were studied. The nanowires which included NiSi nanowires, NiSi/Si core-shell nanowires, and NiSi/SiC core-shell nanowires were grown by varying the filament temperature T f from 1150 to 1850 °C. At a T f of 1450 °C, the heterostructure nanowires were formed by crystallin...
متن کاملPLD-Assisted VLS Growth of Aligned Ferrite Nanorods, Nanowires, and NanobeltssSynthesis, and Properties
We report here a systematic synthesis and characterization of aligned R-Fe2O3 (hematite), -Fe2O3, and Fe3O4 (magnetite) nanorods, nanobelts, and nanowires on alumina substrates using a pulsed laser deposition (PLD) method. The presence of spherical gold catalyst particles at the tips of the nanostructures indicates selective growth via the vapor-liquid-solid (VLS) mechanism. Through a series of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 9 شماره
صفحات -
تاریخ انتشار 2014